slash007

I just realize my link didn't post. Here is the hub/driver I used and am not having luck. https://www.avoutlet.com/window-treatments/shade-components/remote-controls/gaposa-linkit-16/

I had 3 outdoor shades installed and they use Gasposa motors. I purchased this hub in order to get them connected with Control4, but after following all instructions we were not able to get them to connect. Anyone here have experience with this device?

I saw those options and they worked properly last week, but not muting and unmuting does not change anything.

Starting about 3 days ago (at least that's when I first noticed), when I answer a call from my DS2 front door I can see/hear the person at the door, but they cannot hear me. I tried the DS2 on my gate and also tried calling my touch screen, and the same issue on all 3. I have an Android phone, so I tried using the app on an iPhone and we are having the same issue. Rebooting the EA-3 and the POE switch did not help. Drivers are up to date and nothing has been changed recently. Anyone else come across this issue or have any suggestions?

No way to have someone make a custom driver?

I never reached out to him, much quicker to get accurate information here. He's also clueless about most things anyway. Sucks because I just ordered a T4 screen for my sons room, but mostly so that he could open/close the garage doors and gate.

Thanks. That blows.

A few days ago I was unable to control my MyQ products via Control 4. When I click on open the garage door, it just shows that's it's in the opening state forever and the door does not open. I logged into composer and saw this "token has failed, internet or account issue". What would cause that? I have no issues controlling my products using the MyQ app and the password has not changed. Thanks.

Do you still have this?

Appreciate all the responses. While digging in HE last night I read in the notes that I should make sure DHCP was on in the projector settings, and also to turn on the option for Control4. I planned on checking those out this morning, but lo and behold it works again on its own. Guess I'll have to troubleshoot next time. Still would like to know why it quit to begin with.

That's possible, but if that was the case, why would it quit every couple of months for about a day then work again? It's a JVC NX-5. Where can I look in Composer HE to check the IP? Thanks.

I'm assuming my projector is controlled via IP and over the past year every couple of months when I select "wash tv" or watch whatever, everything turns on but the projector. It has always starting working the next day, so I never really cared too much to troubleshoot. Well now it hasn't worked in 3 days and I'm wondering what could have gone wrong? Nothing has changed lately, so I've tried restarting my EA-1, EA-3 and home router. What could be causing my issue? Thanks.

Using my phone is how I check the volume now. I use the C4 remote to change it, but then login on my phone and see what level it's at.

They checked and the latest (only) driver is installed. Are you suggesting the install of the driver might be corrupted and to delete and reinstall, or something else?

Nevermind, found the pin and linked it, but still no syncing in the app. It does say driver not bound. I'm assuming that's the issue? They did remove the driver and add it back, seems they missed a step.

Ah, makes sense. When I click on request pin code using HE, nothing happens. Are you sure it doesn't have to be in Pro?

Thanks! I thought about that long ago, but never tried it. I wrongly assumed that refreshing the navigator would do the same thing. I just rebooted it and now get the option to click and get a pin in the C4 app, but nothing happens when I click on it. Any suggestions?

We updated the driver and still shows linked for Ecobee in the C4 app, yet tells me to request pin code in the extras screen. Tried deleting the Ecobee driver and adding again, deleting the C4 integration from the Ecobee website and adding again using a pin code generated using Composer, but still shows linked. Any other ideas?

Ah that's probably it. I would have to change registered dealer in order to have that done by you, correct? Thanks.

I noticed that my Ecobee thermostats were no longer getting updated in my C4 app after the last OS update. I went to the thermostat and it was asking to go to the "extras" tab and get a pin code so that I could link them with my account. I did, but by the time I was able to login to my account to add the code, it said "code expired". When I went back to my C4 app to get another code, it now says "account linked" even though they are not and it will not let me generate another code. How do I get it realize they are not linked and let me generate another code? Thanks.

One thing I just thought of, in my other room the receiver uses IR control, and on that remote it doesn't show the volume bar on the screen after the update. Since it does show the volume bar on the remote used for the Acurus, it would likely be because it's a 2 way connection. Weird though that it shows 100% all the time. Any idea what would cause that?

Possibly. I'll confirm the connection and go from there. Thanks!

Would be nice if I had a competent integrator... Seems I have to enlighten him to get what I want done.

Makes sense, but that's a bummer. Where can I find a list of supported devices? I currently have the Acurus ACT4. Thanks.

I had may system updated to OS 3.2 mainly for the volume display on the remotes, but it seems that it shows 100% volume on the screen anytime the volume is pressed. Are there certain settings needed in order for it to show the true volume of the receiver? Thanks.