Jump to content
C4 Forums | Control4

Olichops

c4Forums Member
  • Posts

    95
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Olichops

  1. Amen brother, as I also got screwed with the Liftmaster driver. Do local control and don't get shafted by these cloud clowns again!
  2. Yep, been there as I have 7 ecobees in my house with zone controlled unit. It will disconnect with a reboot so make sure you are on a UPS as the slightest glitch with kick you off. Make sure that you you don't have any other binding in the ecobee account. AS why it has to connect to the cloud server is stupid as much more reliable to just connect locally. Other than that don't have any other ideas. My end has been stable for a few months now.
  3. So for some reason my sirusXM channel list stopped at 104. I deleted the sirius account in control4, added it back, now I can't login back in to activate the stream. I have two Sirius accounts which I can login fine with the PC. What is the deal?
  4. Some More Trash talking, Davis does have a new color touch screen console that connects its data on Wifi instead of the crappy ethernet adapter FYI. It would be nice to have C4 integration with Davis Weather stations!
  5. Any time line for the Unifi Drivers?
  6. No go on new drivers as I think the IR is propritary and the company has no interest in development. I just use the contacts built in the fireplace and a relay to turn it on and off via a Kasa Cube
  7. So spoke with the C4 Dealer and he sais he sees this all the time with Sony TVs. That is why they use the IR eye instead of the network cable. Good to know!
  8. Yep a USW Flex Mini. Works fine until i pluged the TV in then every thing went to shit. Cold reboot of the TV fixed the issue and no new TV firmware was indicated. No Sonos Sound Bar. RSTP is on globally. Just a strange occurance that appears to be fixed for now
  9. So I had a weird problem where my whole Unifi network went offline except for the Gateway. After reboot, one mini 5 port switch would not come online in the console page. rebooted that, it came online and crashed the whole network. Traced it to the Sony TV which was off and hard wired in. Plug that in and crashed the network. The TV wifi was off and after power cycle the TV all was good again. What would cause a single device like this to be able to bring the network down when it was behaving fine for years with no changes?
  10. Nope he is 6 posts up and was responding to his dual question of UI integration. The home is actually currently on a Ubiquiti network with multiple Ubiquiti access points, network switches, and even 14-15 UB cameras. Does anyone know if the Ubiquiti cameras can be integrated into C4? I have LUMA at my lake house, and the integration with C4 is great. My new house came with all the Ubiquiti stuff from a prior owner, and I'm hoping it will all work with C4.
  11. Why is it every time I fully power off my EA5, I have to relink my ecobee driver with a fresh PIN code?
  12. Yes you can integrate the Unifi Cams into C4. msgreenf in this thread has the driver for it. Mainly useful for viewing. If you want to do any NVR then best to go to the app or web browser.
  13. So I had Minke Air fans installed outside and the C4 fan controller does not play nice with the DC motors on these fans. It fries the reciever if the fan is started on low speed. Dealer did not pick up on the fact that the Fan controller does not work with DC fans. So replaced a fan a second time and want to control the fan by Bond Bridge. I have it linked up but need to know if I can just configure the fan controller to be all key press to link to bond that will control the fan. I guess I will have to have the fans on constant power bypassing the c4 fan switch as all the keys will act as a keypad. It seems the driver only has speed up/down and toggle. No direct speed of 1-6 like the original remote and the bond remote control. I did download the Bond 6 speed fan driver. Any way to have the C4 fan controller always on but still use the buttons as keypad buttons only?
  14. Thanks for the heads up! switched to Verizon and all has been good on thier network. Over a year is too long to wait for a fix when there are alternatives.
  15. Manual execution of the event work fine. What are the pucks everone refers to as I have light switches.
  16. So sometimes my outdoor lighting schedule does not turn on at night or only some of the lights in the schedule will turn on. The zigbee signal is 3/4 and no reported send/receive errors. I think the issue may be I have multple schedules for lighting to all go off at the same time which I now staggered by one minute. Could this have been the issue and does C4 switches have any 2 way feedback to confirm that the switch action was actually executed?
  17. Niffty idea, but bad in practice. Unifi geofencing works sometimes so I would not depend on it as too many variable in the chain of phone, cell carrier, ISP, etc. Personally I would never depend on geofence to close the garage as will never know if it worked when you leave the fence. Now to open, pushing the button on the homelink is not that hard and always works! Now gepfence the alarm when all members of the house has left is what I want to see!
  18. Not sure if it is a DC motor but the speed controller is built into the fan housing. Yes a C4 Fan controller
  19. Ok, second time my MinkaAire Xtreme fan died on start up! It seems to kill the fan if you start the fan at a speed other than high with the C4 Fan switch. The fan moves a little to find the correct direction as it normally does but this time it just never came back to life, just the same way the last one died. These fans have the integraded controller in them so no way to wire the juice direct to the fan. Anyone else have this issue??
  20. I have been using the music wake up feature without issues until my internet went down and the music did not play and there was no last train to the coast with the three men I admire most. So C4 developers, can you meke a default alarm sound if the internet goes down so people can wake up to an alarm. Sonos does this... Thanks, Don McLean
  21. Yep, had the same issue where some commands work and other times they are not synced. Appently a known issue with the interface, maybe a reboot will help. If you want it working right get the $20 serial adapter from amazon and the $200 driver here. https://bnet4solutions.com/portfolio/bpentair/ Works great with many more options. if you read the documentation, the developer discusses the exact issue you are having.
  22. Agree, not talking about the cell network, just the one router at work that is blocking my video to the DS2
  23. Here is my 2 cents, I have a Pentair system with the intellitouch panel. All you need from this point is this driver https://bnet4solutions.com/portfolio/bpentair/ for much cheaper than the ilink Pentair has and way more control of the system that pentair allows. The driver is great as you can add icons to all the C4 Touchsceens and monitor the pool chemisty if you have have the ichem, control all aux relays, etc!
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.