J to the D

I think it was $99. I’m my opinion it’s worth every penny.

Another vote for the Annex 4 driver. I have 4 LG OLED’s with this driver and it’s absolutely bulletproof. The only issue is after a software update you have to manually turn the tv on the first time. The mini drivers for Netflix etc work great too.

Slightly different but I had a similar issue with the Chime. It kept sending notifications saying the doorbell had been rung when it hadn’t. I had to do a full system reboot to fix. Not sure if you have tried this but have you tried connecting a simple relay or meter to the dry contact on the gate? This would help you determine if the gate contact is working correctly or not. I’ll put a bet on there is a software glitch somewhere but hopefully I’m wrong.

Yes, you can set and unset with the Control4 app. This can be both full arm and part arm.

I have this issue too. I had no problems before the firmware update and now regularly I get this network issue. I have to leave it for 30 seconds or so and it reconnects. Sometimes it reconnects and then just won’t work. it will turn the tv and source on then nothing else. You have to leave it for a few seconds for it to almost boot up and then it works again.

I have Texecom Elite with both Smartcom and ComIP. My understanding is you need both to enable integration with Control4 and use the Texecom App. If you don’t intend on using the Texecom app then my understanding is you don’t need both modules. Installation has been done for a few years now and it seems to work well. I have a couple of niggles and looking for a new alarm installer as not many understand the integration with Control4. With regards to integration, this has been a game changer. I now have the ability to use individual room sensors and door contacts for various programming. I particularly like the ability to turn lights on with alarm sensors. The ability to have notifications and status along with automatic setting of the alarm has been great. For example, I have an evening routine which automatically sets the alarm at night. There are a few niggles, for example the Part Arm settings are not named so unless your a frequent user or only have one part arm, it can be confusing. I find myself using the Texecom app if I need to set and unset the alarm but this is not frequent at all. For the small cost difference, I would recommend both the Smartcom and ComIP.

Deleted

How annoying. Only want to to show a light if any of the doors are unlocked

The new home app is a big improvement and happy to use that. I only wanted integration for lock status but doesn’t seem as though that is possible.

Yeh I have tried this but comes up saying the Gateway is unable to find any locks and to check connections. I did read somewhere about firmware issues which is a shame. Not sure if its down to this or something which has been done wrong in my setup.

I have a Yale Conexis in the UK and originally tried a Zigbee module for C4 integration which didn’t work very well. Since then I have installed two further Yale Conexis locks with no integration into C4. I was notified last week that Yale are no longer supporting the old app and if I wanted to continue using app connectivity I would need to install a new Yale module to connect to the Yale Home app. Good job I want still using zigbee as there is only room for one module. I also took the opportunity to upgrade to the WiFi units and I’m pleasantly surprised with the new app and connectivity which are working great. The question is, is there a driver which will allow me to get the status of the locks into C4? If so, is there anyone who would be prepared to install this driver? Thanks

Yeh I tried to manually execute it and it just wouldn't work. I have since renamed the audio file and added it back into announcements which seems to be working. Very strange but at least it's working.

Has anyone had any issues with this no longer working? I had this all up and running but for some reason it has stopped and I can't figure it out. When I had music on the other day the music seemed to stop when the doorbell went but no sound was played. I have checked the file and its still there... Thanks

Yes with HomeKit you can control stuff without being on the internal network. For example I have a shortcut set up to open my gate and garage door when coming home. Just surfaced these devices in HomeKit from Control4 and then use HomeKit. Very easy to do and works great.

Thanks for this. I never knew you could do that! I have changed the sensor for a single load dimmer in the same room so will test it out. After further investigation recently, I have realised the error occurs on all my dual load dimmers in the property and even managed to get into composer when it happened to look at the light sensor. Amazingly the sensor was reading 255 despite the room being in complete darkness. I have managed to get a screen shot of a dual load showing 255 yet another dimmer in the same room showing 0... Control4 have suggested it might be a corrupt driver so I'm going to reload that as my next test. It really is bizarre and something I have never seen before. For all dual load dimmers to be showing rogue ambient light sensor readings, it does suggest to me its a software issue/glitch.

I’m having a weird issue around the LED’s on UK dual load Control4 dimmers and wondered if anyone has come across this before. I had Control4 retrofitted to my property so in the main bedroom I have two dual load dimmers, single load dimmer and two keypads (no loads). The keypads and single load work without problems, however the two dual loads seem to turn on the button backlights and status LED’s when they feel like it at night. I have put a customised profile in for all 5 keypads so the LED’s go off in darkness which works fine except for the dual load dimmers. When the room is dark the LED’s turn off correctly but will then randomly turn back on and off throughout the night. To ensure I wasn’t going mad I set up a camera on the keypads to see what they were doing at night and counted over thirty times when the button backlights and LED status lights turned on and then off again. This was at completely random times throughout the night and sometimes came on for a minute or so and other times would stay on for 20 minutes. It’s really annoying because they come on at full brightness and wake us up. There is no change in the ambient light and I can’t see anything else causing an issue. My dealer kindly supplied me a new dual load which was fitted but sadly the problem still occurs suggesting this is a software issue. Thanks in advance for any advice.

I tried going onto their website and it doesn’t seem to work. Glad they’re still operating. Will send you a PM

I’m looking for wireless window sensors. I already have some Nyce sensors on doors, are they still in business? Any other recommendations? Thanks

I may give that a try. Is there a way to get the gate feedback on the experience button? Nice to be able to show an open gate when it’s open

That menu looks good. Might have to get the dealer to do the update.

Is anyone able to upload a screenshot or link to the the new menu? I haven’t seen it before.

I'm trying to see if there is a way to change the on screen navigator buttons. I have a gate which shows under security but it is a toggle instead of on or off and would prefer to leave it this way. But, I would like to change the button with the onscreen navigator to be open only and not a toggle. Control4 gets feedback from the gate but it doesn't register it as closed until it fully closes, however sometimes the gate needs to be opened again before it fully closes and the toggle button only says a close command because it sees it as open. I can do this with custom buttons but that adds extra clicks or I was thinking to create an experience button. Does anyone know if there is a simple option I am missing?

Ahh great, thank you. That has solved it for me.

Hi, I am in the UK so using the Control4 Square keypad which are retrofitted so using a mixture if switched and dimmers. With a few dual load dimmers I have lights in load 1 and a fan in load 2. I noticed there is a specific fan driver but it requires a relay which isn't an option with the dimmers and looks to only be an option with switches. Does anyone know if there is a way to change this? It would be nice to represent the fans in control4 navigator instead of lights. The driver also seems to have timer options too. Thanks

I have done a rest to factory settings and that seems to have fixed it for now. I will keep an eye on it