Bharris
-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Downloads
Events
Posts posted by Bharris
-
-
1 hour ago, wnpublic said:
ARC.
so the hdmi that's coming from receiver go into sound bar, then hdmi out from sounder to hdmi in ARC to tv?
-
7 hours ago, wnpublic said:
This one. The TV will get its video and audio over HDMI from your receiver. You'll tell it in settings to turn off the internal speakers. Your IR remote should then control the volume over optical.
That’s what I figured. But what are the HDMI options if tv is connect via HDMI to receiver and wanted to add sound bar?
-
Yes it has optical. Maybe arc. I have to check. But it’s on zone 2 on receiver for monitor 2 out. So would I use HDMI from receiver to sound bar then HDMI from sound bar to tv?
Or would I just use optical from sound bar to tv?
-
What are my options for a sound bar. I have a game room with 7.1 surround connected to a receiver on zone 1 in an av rack. In master I have just a tv on zone two. Tv is ir. What are my options for sound bar in master?
-
Deleted
-
1 hour ago, alanchow said:
Please use our Kodi mini app as that definately works (i use it everyday).
We don't have long press yet. If you are using our Kodi Full driver (which has the IRUSB protocol built in) then you can map the context button.
I’m using irusb with your nvidia shield driver.
-
-
my dealer can't find the driver properties to enter the code for long press select button in programming, commands. I have the chowmain driver for nvidia shield and amazon tv.
-
17 minutes ago, videostorm said:
firmware v224+ would be the firmware on IRUSB itself (it ships with V223)
Programming would be in composer, commands on our IRUSB driver.
Okay it’s up to date. But I’m not seeing the driver in composer.
-
13 minutes ago, videostorm said:
In programming, the long press select is QHIDCODE6000065
Make sure you have updated your irusb firmware to v224 or higher
Are you talking about IrUSB app or composer HE?
-
Is there a way to program long press select button to custom button?
or get context menu in Kodi?
-
3 hours ago, Cyknight said:
If you have a license, may as well. Nothing wrong with the vid-storm one mind you, but with a license in place, you're set for updates etc as desired alter on.
Thank you for the reply. Am I able to download mini app drivers with composer HE? What are my limitations with composer HE
-
2 hours ago, Cyknight said:
You use one or the other - the Chowmain one is a bit more advanced, allowing certain tie-ins (ie plex, kodi).
Okay thank you. So you recommend Chowmain if he already has a license?
-
17 hours ago, Bharris said:
Ea-1 and 3. Os3
My dealer is coming Friday so I’ll have him look into it.
Do I need these drivers also. Or just the Chowmain?
-
2 minutes ago, Eric Stiff said:
Hmm. Do you know if there is an address reservation in the router for the Shield? If not it is possible that the Shield has been given a new address that is different than what's programmed in the driver. It shouldn't be necessary but try rebooting the controller since the IRUSB was installed after the driver was setup. What controller do you have and what version of C4?
Ea-1 and 3. Os3
My dealer is coming Friday so I’ll have him look into it.
-
1 hour ago, Eric Stiff said:
I know the Chowmain driver is one that requires a paid license; I do not know if it offers a trial but I'm sure it does. Is it possible the trial had run out it did you pay for the driver? The VideoStorm driver is free but does not offer some of the specializations the Chowmain driver does.
Yes he paid for the driver and installed. But I didn’t have IrUSB when he installed. I installed the IrUSB after he installed.
-
On 1/2/2020 at 5:26 PM, Eric Stiff said:
They'll need to know the IP address of the Shield for it to work. Hopefully they have access to the router so they can use an address reservation.
Yes he’s coming Friday. I remember him saying the IP address was already set up for the shield. So the IrUSB is set up on shield. And do I just tell him to use chowmains driver?
-
6 hours ago, msgreenf said:
Did your dealer setup the driver properly?
I showed him which one. He’s actually coming back to fix some speakers that aren’t playing so I will tell him to mess with it. Also I know on the instructions. It says that you need to have the IrUSB plugged in first then you install driver.
-
Hello all, just got my Control4 system
put in a couple weeks ago. I bought the IrUSB and plugged in shield. I told my dealer about the Nvidia Shield driver and downloaded Chowmain driver. I updated IrUSB to v225. But it’s not working with c4 remote sr-260. I’m not sure what I’m doing wrong. Is there anything else I need to do? I also have home edition. But waiting on my windows computer to come in. Thanks all.
Sound bar options
in General Control4 Discussion
Posted
Thank you. So I was looking at a Sony. It has a driver. What would I connect if the master is on zone 2 monitor out of receiver. How would the connections go?