Jump to content
C4 Forums | Control4

Awesomo4000

c4Forums Member
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Awesomo4000's Achievements

  1. Thanks for all the Help!! with all this understood, how about I add three transformers to the panel (hopefully attached to the DIN rail. The would get 120 vac from the 8 channel dimmer module to power the LEDs, and use the 0-10v dimmer module the dim. this way control4 native programing can cut off the LED entirely and The 0-10 can dim it. I’m only running 20-50’ on 14awg so it shouldn’t drop too much voltage, right? I have to split a couple of the led strip into separate strips (the dishwasher, freezer and fridge have to be separate to open) hopefully they will dim and light evenly. does this sound reasonable? I really like the transformers in the panel for Maintenance and keeping the cabinets clean of hardware
  2. I guess it really does output 10v DC... I suppose that should have been obvious but I was under the misunderstanding that 0-10v was just a dimming configuration rather than aligning with a voltage specification. I’ll try talking to an LED distributor and report back unless anyone else cares to chime in.
  3. So what exactly does the C4 0-10v module output? Is it 120v AC or 12 or 24 DC? the installation sheet implies that it’s low voltage and can be connected directly to a light or ballast, but warns that some Lights may need separate on/off control. sorry, confused.
  4. Hello everyone, I’m new to the forum, and I searched pretty rigorously for this info on the history and the internet in general so I’m sorry if it’s been asked and answered. i have a 5 slot panel and decided to add under cabinet and toe kick LEDs to my new kitchen remodel. Regular 8 channel dimmer in the panel working great. I bought the C4 0-10v module but haven’t installed. I ran 14 awg wire from the panel to my LED locations. (All within 30’ of panel) Can I just wire my LED tapes to this #14 and the #14 to the 0-10v module? I only want white light 5000k and dimmable. No pulsing or color changing. I’d really prefer no little boxes hanging out in or under my cabinets. My dealer isn’t sure if the module outputs low voltage For the LEDs but is checking, one electrician says It outputs 120vac and I still need a driver or transformer for each tape or 1 for a series of tapes and one electrician isn’t sure. (I live in a rural area) ive tried to educate myself about LED lighting but I’m just not sure if the module is a driver/transformer. thanks very much
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.