Jump to content
C4 Forums | Control4

cnicholson

Supporter
  • Posts

    349
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by cnicholson

  1. Certainly not for everyone. I get that. But if you take the population that is spending six figures on home automation / home theater / computer control of their nightlights, you’re going to find a lot more Vision Pro users in there than in the general population. Not here to evalgelize— but, as an aside, you might want to get a demo— you might be surprised. A couple of guys from my C4 dealer team were here a few weeks ago and I gave them demos. One was “meh” but the other guy was like profoundly impressed. Anyway, the point of the post is to gently prod/beg C4 to please undo their opt-out so we can use the existing app. All the while knowing that this is a niche thing.
  2. Ha! I hear you. But the Vision Pro is not really about gaming or doing a discrete VR experience. It is geared toward extended use as your work/productivity environment. You have a browser window, a spreadsheets, messages window, mail window, Word, one showing your actually laptop’s screen, etc. all open at once. Anything you can do on your phone, iPad or computer, you can do inside Vision Pro. You guessed it, I’m using it right now to type this. Anyway, in that context, you can hopefully appreciate the desire to use all the app you are used to using— including C4. Absence of C4 app is honestly one of the significant gaps for me. And, just to reiterate, Vision Pro runs ALL iPhone and iPad apps by default (in additional to native apps, of course). If developers don’t opt-out, that is. C4 has opted out— for legitimate testing purposes to ensure good experience. I do have some voice controls set-up, but I still use the C4 app for some stuff.
  3. Any update? I’m happy to test current iPad app via Test Flight. Control4 is one of the only things I can’t easily use with Vision Pro, and actual reality is just so tiresome….
  4. We all need to Rage Against The Garage Door Opener (company): RATGDO. They are awesome. As @Matt Lowe said, flashing the firmware can be a bit tricky based on what computer / OS you have, but not too bad and a 60 second process once you find machine with right serial driver (my Mac worked). I installed eight of them and so far, so good. Chowmain driver even exposes your garage door’s motion sensor, light and IR beam sensors in C4 as a neat bonus. Highly highly recommend. They are about $45/each (you need one per door opener), plus the driver. Install on opener is pretty fast: insert three wires into your motor unit’s wiring spring-clamps. Works over local WiFi— no cloud component at all. Do it!
  5. Sounds cool. Is this all pre-baked in Unifi? I have a Dream Machine SE, but I don’t use Protect. Wondering how hard it would be to implement via emailed photos form my (non Unifi) NVR. Not sure I see a C4 angle, but still cool.
  6. I just installed three of these (and ordered five more) and use with the Chowmain driver. Just follow the directions to flash the firmware (easy) and wire it up (easy) and it works like a charm. I was pleasantly surprised that the driver suite auto-installed supporting drivers to expose the garage opener light, motion sensor and IR-beam stuff and makes them available in C4. Nice bonus (although I haven’t tried those extras— I assume support varies by model of opener). Basic garage door control “just works.” I already pointed my old (broken) MyQ based programming to the new drivers and restored ability to control doors from DS2, navigators, etc. Good stuff!
  7. Any limit on number of doors/gates controlled in a single project? I have a lot of garage doors.
  8. Awesome. I will explore more. I did have the same question as @Shoe in terms of how to literally do this in composer. Are you firing off scheduler events of like every 14th of month? I'm still not seeing how to do this directly in Programming. Taking cues from @RAV, I have started to do this by using a HolidayState variable that I set to "Valentines" on 12:01am every Feb 14 and then set to "None" at 11:59pm every Feb 14, etc. and then in my Sunset event, I do a series of "If HolidayState=Valentines then [do Valentines stuff], then stop." With default stuff at bottom
  9. Happy Valentine's Day! I sat down this morning to do some programming to make all my landscape lights be red tonight. I currently have a Scheduler event for Sunset everyday where I turn on landscape lights. I decided I should make a macro that is invoked as part of my Sunset actions "Turn on Landscape Lights" and want to put in some conditionals to kick off different landscape lighting programs based on special days / ranges. Like Feb 14 every year or Xmas lights between Dec 1 and Dec 30, etc. I guess I just assumed that there would be a system variable for Current Date and I could drive it off that (hopefully with > and < modifiers). But I'm not seeing that. What's the best way to do? Kludgy idea I had was to create a variable "DaysElapsed" and increment once at midnight (and reset Dec 31) and drive the logic off that by manually computing that Feb 14 is the 45th day of year (or whatever) and using my variable in conditionals. Is there a better way?
  10. Agree with you comments, but would add that the ability of end user to directly program / tweak the system WITHOUT getting too deep into the weeds of the tech stack is, for techie tinkerers, a huge huge plus. I want a professional solution that "just works" for the basics, but I can't image NOT being able to constantly add/improve stuff myself. I understand that most customers don't care about this level of control / don't find it fun.
  11. One of my regrets is going with Lutron panelized/centralized lighting. It "works" awesome, but I have found that the only way to get refined simultaneous ramps up/down in scenes with lots of loads is to do the programming on the Lutron side which is a huge pain since, as end user, I can't fiddle with the Lutron programming-- and the need to bulk upload the whole project to make even small changes in annoying and inefficient. I should have stuck with C4.
  12. Excellent point. A lot of details you will be deciding now will make integration much easier (or harder or impossible) later. Fireplaces, landscape lighting, wiring for lighting (panelized or traditional) etc, etc.
  13. I faced the same question four years ago and ended up with Control4. I would do it again today. Your list is pretty comprehensive, especially if by "AV" you mean a whole-house audio system. When we built a previous house, I did everything DIY, and had some fun doing it, but I wanted a "grown up" system to be, as you said, one system to "rule them all." I think of the house as a series of subsystems, that roll-up in Control4, and one screen to control *everything*. Control4 can do that for you, in spades. I would ignore your architect's comments and instead talk to a few dealers that are local to you. As others have noted, these things are likely outside their area of expertise, no matter how great of an architect they are. Your doctor has probably heard stories of people being unhappy after buying a boat. One thing I would say, regarding expectations: it can be expensive. Depending on the budget/scope of your project, that may or may not be significant to you. Relatedly, be prepared to pay a multiple of the price for a lot of components versus the "consumer" versions. It is what it is. There are often ways to save money around the edges, but I would recommend you stick with solutions your dealer recommends and will support.
  14. Awesome. I'm going to try this. I saw in a YouTube video (targeted at Home Assistant users) that the Ratgdo seems to track percentage open and you can open to any percentage of open. Does your driver support this? My use case is that I have a "whole house" exhaust fan in one of my garages and I would like to programatically crack the garage door open a bit and run exhaust fans during summer in certain situations.
  15. Yeah. I am am one of those idiots who bought one Day One. Love it so far. While I do not expect Control4 to do a Vision Pro native app right away (if ever), it would be awesome if they would simpl make the iPad app available for download and use in compatibility mode. From my understanding, developers need to “Opt-Out” affirmatively for their apps to *NOT* show up in App Store for Vision Pro, so looks like they either opted-out or perhaps they flagged app as being targeted for an older version of iOS (and not current versions). Anyway, I hope someone at Control4 will get around to ticking the right boxes— no actual work required. Hopefully they are just waiting to test the stability in compatibility mode before ticking the boxes (I’m happy to test it for them). As an aside, you can place persistent, spatially-anchored buttons around your house and make them kick-off Apple “Shortcut” scripts by just looking/pinching which can, among other things, control C4 devices (assuming you have otherwise linked Homekit and C4). This circuitous approach is very kludgy/janky/beta for now, but still fun.
  16. Hmm. Do you have more than two physical connections to your AMC inputs (per EA-5)? Is the behavior you see the same as if (previously) you tried to add a 5th or 6th stream? Just guessing, but maybe the EA-5(s?) are holding open a phantom path for announcements or something such that they think they are out of valid paths? I was thinking a brute force solution might be to make more physical connections to the AMC (from EA-5a) and/or a cross-link connection between AMCs so that either EA-5 can reach either AMC. Good luck.
  17. Link to driver? Is this just a webview to manually use their web interface or can I programmatically control the Vestaboard from Composer programming (hopefully with some variable manipulation and not just static text). When I saw the Vestaboard for first time, my first question was about C4 integration-- so hopefully this is now supported. Awesome product, but pricey for sure. I love the retro-future hybrid vibe of the thing.
  18. I don't use Alexa but, generically, I would see if you can get Alexa to control a dummy device (a driver for a device not actually in your physical system) and mirror the volume adjustments with programming
  19. Not in a way you would probably like (with media selection on C4 navigators). You'd have to Shairplay the source to C4 or use a TV (or Apple TV, etc.) running Youtube app as the audio source (assuming the TV's audio is already backhauled to your matrix).
  20. I have ongoing issues with Sony TV's dropping off the internet, so not a C4 problem, as such. Solution for me (annoying) is to reboot TV's when they lose their connections. I like the TVs but I went with LG/Samsung for the next dozen or so TVs I bought....
  21. Totally agree. As I reported, it is "good enough" for me in an infrequently used location. YMMV. As for fire risk mentioned by others, I see the theoretical risk, and maybe a CRT tube TV might have parts that can start a fire, but I kinda doubt this has ever happened with a flat screen TV.
  22. I bought a "SAMSUNG 75-Inch Class Crystal UHD AU8000 Series" for about $950 (looks like the 65" version is $750). Works well for me and brightness is "good enough" during the day and more than good enough in evening. I looked at same article you posted and decided to go (relatively) cheap on the theory that outdoor TV's are kind of disposable. If I get three years out of it, I'll be happy. So why pay 2X for a really good one (or 6X for official outdoor one)? Just bank the savings and replace when needed. I don't want to cry too hard if I forget to cover it and rain kills it. Anyway, that was my logic. If this is a primary viewing location for you, your math may be different.
  23. OMG, backups on 3.4.1 are insanely fast, at least on CA-10. My prior testing of backup times was 2 mins an 2 seconds on Core 5, 1:39 on CA-10. Now CA-10 is 26 seconds.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.