Jump to content
C4 Forums | Control4

Mono

c4Forums Member
  • Posts

    9
  • Joined

  • Last visited

Posts posted by Mono

  1. I can't take a picture as I'm not at home right now.

    I can still turn on lights using the buttons on the dimmer units in the panel.

    We only use control4 for lighting, we inherited it with the house.

    My hc250 has 2 or 3 blue lights on the front panel and as I mentioned the lighting worked up until yesterday.

  2. Hello 

     

    I have just moved into a new home with a control 4 system.

    The system has 5 keypads each with 6 buttons on them. I believe from research that these are ZigBee pro.

    The lighting in the home does not work, the keypads seemed to have white leds showing apart from 2 on each keypad that were blue.

    The previous owner has taken their router with them.

     

    There are two 8 channel dimmers.

    There is 1 Bus Ethernet gateway.

    There is 1 C4-HC250-BL-1 controller.

    I just want the lighting working from the keypads.

    So far I have

    Installed a new router

    Assigned the IP of the controller to 192.168.1.254 in the router

    I did do a network reset on the controller but I did not do a factory reset.

    On the keypads I pressed the top button 9 times bottom 4 and top 9 each keypad turned off and back on again with all leds lit blue.

    The controller has the power and link lights lit

    The dimmers led are flashing orange/green.

    We can control all the circuits by using the buttons on the dimmer units but not from the keypads.

    I am waiting for a pro to get back to me but in the meantime what would you recommend I do next?

     

    Thanks in advance

     

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.