Jump to content
C4 Forums | Control4

Multi-Channel Amp 3


evoltin

Recommended Posts

Hi, I have the new 3rd version of the multichannel amp. I just had it hooked up, but when I select the room I want within Composer (say room 1, and imput 1)...then on the AMP rooms 1 and 2 turn on to inputs 3 and 4. Essentially, output 1 in composer turns on 1 and 2 on the amp? This continues and room 2 turns on outputs 3 and 4...etc. What is going on here...any suggesstions?

Link to comment
Share on other sites


Check and see if under system design, when the amp is selected, if the inputs are locked. If they are, double click on the amp and check to see how they are locked. It could be possible that input 1 is locked to outputs 1&2, input 2 to outputs 3&4. I would check this, first. You can click the boxes to relock them to the correct inputs. Or if you are using the amp as a switcher, then unlock the inputs.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...