Jump to content
C4 Forums | Control4

Recommended Posts

Hello!

 

I'm using the IP camera Samsung SNV-6084R in my Control4 System.

I added the camera driver in Composer Pro and configured it.

After all I was tested it in "Camera Test" page and all tests was successfully finished.

When I double click on the driver in Composer, it is showing control interface and all "Image View" are work well.

 

But...

 

In the navigator there is not image. It is only black image.

 

What's the problem?

Link to comment
Share on other sites


I'll agree with Matt then- not looking at a MJPEG 640x480 format/resolution.  Double check your res.

Anyway there is not image. For jpeg snapshot I use url

http://xxx.xxx.xxx.xxx:/cgi-bin/video.cgi?msubmenu=jpg&resolution=7

and for mjpeg

http://xxx.xxx.xxx.xxx:/cgi-bin/video.cgi?msubmenu=mjpg&resolution=7

 

The driver is corrected, I wrote it with the official tutorials and the same driver for another IP camera (for example, Panasonic WV-SP105) is working well.

 

Maybe there are the specific jpeg and mjpeg formats for navigator?

Link to comment
Share on other sites

For access to the camera it is using the digest autentification (not basic). Maybe it's reason of problem?

Assuming you are on 2.5.3, then yes, that will be your problem. The new camera proxy only supports HTTP basic authentication per the Proxy and Protocol Guide for 2.5.3, and Digest authentication will be supported in the future. Also, HTTPS is not supported either...

Link to comment
Share on other sites

  • 2 months later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.