Jump to content
C4 Forums | Control4

LED Tape / DMX driver math


SMHarman

Recommended Posts

Anyone willing to check my math here?

LED Parts

I have Meanwell DR100-24 100W 24V transformers. One for each DMX driver.

http://www.cdiweb.com/ProductDetail/DR10024-Mean-Well-USA/312782/

My DMX drivers do 1A per channel.

http://www.enttec.com/?main_menu=Products&pn=71008

I'm using 24V 5050 60SMD 60 LED/M > 14.4W/m

RGB rolls

2800k rolls

6000k rolls

My Math is that

RGB Tape

So for the RGB tape that is the 3A over 3 channels allows me 5M of tape (14.4Wm/3Ch = 4.8W/m with 24V and 1 A that gives me 24W of power over 24/4.8 = 5m of tape per transformer.

White Tape

For the single color tape I have only one channel so I can only get 1.66M of tape per channel before the DMX driver is over current. 24W/14.4W/m = 1.66m

Implementation

I'm planning to run the RGB at far lower than max.

For the White I plan to work to 80% of DMX driver max so about 1.3m and then slice the tape into even 12 in parts along the countertop. I'll have the two temps side by side so I can turn up or down the color temp of the countertop and cupboard lights.

Once I am confident of the math I need to get the soldering iron out to slice and join.

Link to comment
Share on other sites


Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...