Crazyjack Posted February 13, 2018 Share Posted February 13, 2018 Hello...I'm looking for recommendations for a better motion detector. I have a couple of really old Card Access motion detectors and would like to add a few more. I'm not sure if I want to use the Card Access ones again. I'm looking for something smaller and more modern. My current ceiling one looks like a giant stick up air freshener and my wife doesn't want me sticking more of those on our ceiling. I'm interested in both ceiling and wall mounted units and prefer some that are native to C4, no zwave. I've heard about NYCE, are there others? Link to comment Share on other sites More sharing options...
msgreenf Posted February 13, 2018 Share Posted February 13, 2018 Axxess make some nice ones too Link to comment Share on other sites More sharing options...
zaphod Posted February 13, 2018 Share Posted February 13, 2018 Looking at the photos the NYCE one appears to be about half the size of the Axxess one - at least for the wall mounted units. Axxess: NYCE: Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted February 13, 2018 Share Posted February 13, 2018 You can also use Phillip Hue Sensors Now - Cheap and Cheap Driver Saying that we have 6 Axxess Sensors and they are great Link to comment Share on other sites More sharing options...
zaphod Posted February 13, 2018 Share Posted February 13, 2018 Is there any latency in the Hue sensor vs the more native Zigbee or Z-wave sensors? I have a few Hue lights and I would say that they take a touch longer to come on then the native C4 controlled lights. Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted February 13, 2018 Share Posted February 13, 2018 phillip is pretty good - not notice much Link to comment Share on other sites More sharing options...
Crazyjack Posted February 14, 2018 Author Share Posted February 14, 2018 So you can use the phillips sensor on any light, not just hue? Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted February 14, 2018 Share Posted February 14, 2018 You Can control any light, when you buy the driver, plus it also give you Temp Link to comment Share on other sites More sharing options...
zaphod Posted February 14, 2018 Share Posted February 14, 2018 20 minutes ago, Gary Leeds UK said: You Can control any light, when you buy the driver, plus it also give you Temp Is the Temp of much practical use? Don't you need a multi-zone HVAC system to really put that to use? Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted February 14, 2018 Share Posted February 14, 2018 No not really just shows how warm it is in the Toilet, living Room etc !!! Link to comment Share on other sites More sharing options...
Deegan12 Posted February 14, 2018 Share Posted February 14, 2018 What is needed to get the Hue sensors integrated to C4? That would be amazing. And am I understanding correctly that these report temperature as well? Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
rea Posted February 15, 2018 Share Posted February 15, 2018 Those Axxess sensors look nice. I've got a couple of places where I'd really like to integrate, but my local dealer has been very slow at addressing this. Any of the fine dealers on here carry these and able/willing to sell me a couple and integrate? Link to comment Share on other sites More sharing options...
Gary Leeds UK Posted February 15, 2018 Share Posted February 15, 2018 On 2/14/2018 at 8:17 PM, Deegan12 said: What is needed to get the Hue sensors integrated to C4? That would be amazing. And am I understanding correctly that these report temperature as well? Sent from my Pixel 2 XL using Tapatalk https://www.unilogiq.com/en/control4-drivers These guys sell the hue sensors driver Link to comment Share on other sites More sharing options...
Studio5150 Posted September 20, 2018 Share Posted September 20, 2018 Hi everybody, I just buy the driver from Unilogiq for the Hue Motion detector and any Idea why the "temperature display" display 48.9°C ? And why the motion detector have any reaction ? The connection with the Bridge and the detector is correct (display the 30 numbers) ... Thx for you help Best S. RESOLVED: I forgod to copy past the HUE string into the driver. MANY thanks to the support from the dev team of the driver. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.