dinosaur Posted April 21, 2009 Share Posted April 21, 2009 If you have an PTZ camera on your C4 system how is the PTZ feature utilized from Navigator? Are there controls on the Navigator screen? Or, something else?I'm specifically asking about Panasonic PTZ POE camera BB-HCM511A.Thanks. Link to comment Share on other sites More sharing options...
henniae Posted April 21, 2009 Share Posted April 21, 2009 The Navigator interface will have buttons to control the PTZ of the Panasonic cameras. Link to comment Share on other sites More sharing options...
RyanE Posted April 22, 2009 Share Posted April 22, 2009 Pan and Tilt are controlled on touchpanels by touching on the camera image the location you wish to center on the image.On the on-screen, you select the camera image, then you can use the up/down/left/right buttons on the remote to pan/tilt the camera image. Press select again, and you 'un-capture' the camera image, and up/down/left/right work to navigate around the camera page again.Zoom in and Zoom out are buttons to the side of the camera image.RyanE Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.