AS2 Posted January 31, 2006 Share Posted January 31, 2006 I’d like add a door sensor into my Control4 setup. I have done some research and found that the GE Quik Bridge system would work well for my needs. That said, if someone here has used these sensors, please take a look at my equipment below and let me know if I have the right idea.All I want in the ability to wirelessly sense ONE door opening. The receiver will be hooked up to the contact input on the C4 Home Theater Controller. On the door:I want to use the GE Security Quik Bridge Wireless Sensorhttp://www.homecontrols.com/cgi-bin/main/co_disp/displ/carfnbr/172/prrfnbr/305/GE-NetworX-Wireless-Micro-Door-Window-SensorOn the receiver end: do I need the full blown GE Quik Bridge Loop Sensor?http://www.homecontrols.com/cgi-bin/main/co_disp/displ/carfnbr/172/prrfnbr/3806/GE-Quik-Bridge-Loop-Receiveror can I just use the GE Quik Bridge 2 Channel Receiver?http://www.homecontrols.com/cgi-bin/main/co_disp/displ/carfnbr/172/prrfnbr/3800/GE-Quik-Bridge-2-Channel-ReceiverI’d rather the latter as It’s cheaper. Not 100% positive it’ll do the job however. Anyone try this? Also I found this site to buy the GE Quik Bridge products:http://www.homecontrols.com/cgi-bin/main/co_disp/displ/carfnbr/172/sesent/00does anyone have another vendor for this equipment?Thanks,AS2 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.