Silvaskin Posted June 19, 2019 Share Posted June 19, 2019 I've definitely seen these codes set somewhere in Compose HE, but I can't seem to find them now. Can anyone tell where they are set in Compose HE? Quote Link to comment Share on other sites More sharing options...
Crustyloafer Posted June 19, 2019 Share Posted June 19, 2019 Go to DS2 driver and and then set 'advanced properties' to 'Show' and then scroll down. Quote Link to comment Share on other sites More sharing options...
Silvaskin Posted June 19, 2019 Author Share Posted June 19, 2019 Hmm, I've been looking there, I don't have 'User Code 1-12' listed anymore under advanced properties just the codes for relay/output/virtual. Any reason why that would be? Am I looking in the right place? Quote Link to comment Share on other sites More sharing options...
mstafford388 Posted June 19, 2019 Share Posted June 19, 2019 might be on an old driver or firmware version. Quote Link to comment Share on other sites More sharing options...
msgreenf Posted June 19, 2019 Share Posted June 19, 2019 might be on an old driver or firmware version. Shouldn't be old driver. It may not have the latest firmware. Didn't check Sent from my Pixel 3 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Silvaskin Posted June 19, 2019 Author Share Posted June 19, 2019 This is the driver and firmware version. Does anyone know the latest for both? Quote Link to comment Share on other sites More sharing options...
Crustyloafer Posted June 19, 2019 Share Posted June 19, 2019 See those fields that say 'Directory Position' and 'Relay 1 User Code' that is what you use. The first useable director position is position 2, as position 1 is used internally by Control4 system. For example, User 1 is Directory Position 2, User 2 is Directory Position 3, and so on...... First change and then set the directory position number you wish to use/alter. Then enter the user code you want to use with that directory position under 'Relay 1 User Code' and then press 'Set' to apply that code to the previously selected directory position. Quote Link to comment Share on other sites More sharing options...
Crustyloafer Posted June 19, 2019 Share Posted June 19, 2019 14 minutes ago, Silvaskin said: This is the driver and firmware version. Does anyone know the latest for both? Latest version is driver version is 236 and current firmware is 2.25.0.34.7 Quote Link to comment Share on other sites More sharing options...
Silvaskin Posted June 19, 2019 Author Share Posted June 19, 2019 Got it! ta... Was this changed after 2.10.1? I could swear it used to be one list of fields before, 'User 1', 'User 2' etc. I haven't changed codes in a while... EDIT Just checked the driver revision history: "228 Added/expanded support for the Keypad module, 5 Button call module, and Touch Display module. Added support for the full customizable directory in the DS2. Previously set user code properties should be automatically migrated into the new directory structure. Added support for the expanded DS2 Lock driver and all lock functionalities over the hardware switches and inputs. This includes user data creation, deletion, and editing via touchpanels and mobile devices." Looks like that was when it changed... Crustyloafer 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.