burowyako Posted January 13, 2020 Share Posted January 13, 2020 13 hours ago, kylejdavies said: Hi, for the wiring I took a 12v from the C4 contacts and fed this to the com on the relay (jumper wire) then I used a spare IR bud and cut off the IR end, plugged the 3.5mm mono plug to the trigger port on my amp and the 2 wires to the relay on the controller. The tip wire is the +12v feed which goes to the NO port on on the relay and the GND wire from the plug goes to the GND on the C4 contact. Thanks Thank you! I'll give this a shot and see how it goes. Any concerns with me using one contact and relay to feed more than one amp? 7 hours ago, lippavisual said: Because you're using the TruAudio amps, you'll have to add the C4 AMP drivers, so they will give you audio endpoints along wit the trigger option. You'd use the 8 channel version even though you only have 6 zone amps. Awesome. Thank you! Quote Link to comment Share on other sites More sharing options...
msgreenf Posted January 13, 2020 Share Posted January 13, 2020 One relay per amp Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.