TylerMRoach Posted January 16, 2020 Share Posted January 16, 2020 Has anyone setup these cameras a motion detectors within c4? I have it all working but I am not getting motion triggers passed from the camera to the dummy motion detector to the programming. I know the reaction programming is good but I wonder if I don't have the camera configured properly. Quote Link to comment Share on other sites More sharing options...
lippavisual Posted January 16, 2020 Share Posted January 16, 2020 You're going to get a lot of false positives. Do it properly and install a separate PIR or similar. Quote Link to comment Share on other sites More sharing options...
TylerMRoach Posted January 16, 2020 Author Share Posted January 16, 2020 I am not worried about false positives. I can adjust all of that thus my desire to use a camera as a motion detector. At the moment I am not getting any motion notifications at all. That is my main question. Camera is working via c4. Motion output is connected to a generic motion sensor driver. upon motion send me an email is the programming for now. I can click execute and get the email but the motion trigger is not working. Has anyone done this with this type of camera? What setting am I missing. Quote Link to comment Share on other sites More sharing options...
lippavisual Posted January 17, 2020 Share Posted January 17, 2020 I gave up on this a long time ago. You will not be able to fine tune to your liking or to have no false positives. Good luck. From what you’ve set up so far, sounds like it’s connected properly. However, not sure the 310s are even capable. Quote Link to comment Share on other sites More sharing options...
TylerMRoach Posted January 17, 2020 Author Share Posted January 17, 2020 Solved - once I inverted the sensor in C4 things work perfectly! Quote Link to comment Share on other sites More sharing options...
Ksullivan86 Posted August 18, 2020 Share Posted August 18, 2020 On 1/17/2020 at 7:54 AM, TylerMRoach said: Solved - once I inverted the sensor in C4 things work perfectly! So this is working for you now? Quote Link to comment Share on other sites More sharing options...
nxr Posted February 24, 2021 Share Posted February 24, 2021 Hello, can you share how you did this. I can't get it to work. Thanks Quote Link to comment Share on other sites More sharing options...
robbie3130 Posted February 25, 2021 Share Posted February 25, 2021 Connections > Network - make sure the IP is listed there as well as in the driver Verify the Camera's Authentication Method: Log into the camera's user interface, and go to Configuration > Security. 2. Verify both RSTP and WEB Authentication are set to digest/basic, and click Save. Quote Link to comment Share on other sites More sharing options...
nxr Posted February 25, 2021 Share Posted February 25, 2021 I can see the camera fine I just don't get the push notification when there is motion. I have the camera motion output connected to a motion device and have that sensing the push notification by programming when the motion is triggered. the push notification works if I execute within programming but nothing happens if I just walk in from tof the camera. Quote Link to comment Share on other sites More sharing options...
robbie3130 Posted February 25, 2021 Share Posted February 25, 2021 If both of my suggestions weren't done you would still be able to see the camera. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.