Ceej Posted January 24, 2020 Share Posted January 24, 2020 The Ra2 repeater is (i believe) set up correctly and on the local network. However it is not showing up in the connections IP network device list. I tried to input the IP in manually and it says offline. Im using the latest Composer OS. Never had an issue before. Anyone else having trouble with this? Quote Link to comment Share on other sites More sharing options...
JSTRONG Posted January 24, 2020 Share Posted January 24, 2020 I see this main repeater using sddp in 2 of my projects. Are you sure it’s on your network and has an IP address ? Test with ping Quote Link to comment Share on other sites More sharing options...
Ceej Posted January 24, 2020 Author Share Posted January 24, 2020 Tested. Everything checks out. Quote Link to comment Share on other sites More sharing options...
Matt Lowe Posted January 27, 2020 Share Posted January 27, 2020 i dont remember there being any specific setup for lutron have you checked the driver documentation to make sure you have all the correct settings. Quote Link to comment Share on other sites More sharing options...
JSTRONG Posted January 27, 2020 Share Posted January 27, 2020 I also thought I read not to use sddp. But it should be listed in the docs Quote Link to comment Share on other sites More sharing options...
mstafford388 Posted January 28, 2020 Share Posted January 28, 2020 Make sure you change the default login on the Lutron processor. Lutron integration does strange things when not changed. Darkimedes 1 Quote Link to comment Share on other sites More sharing options...
Darkimedes Posted January 28, 2020 Share Posted January 28, 2020 If the system was recently updated to the 12.4 firmware, the default logins are deleted. Create a login specifically for Control4, as @mstafford388 suggested. I would do this anyway, even if not on 12.4. Quote Link to comment Share on other sites More sharing options...
Composer4hire Posted January 29, 2020 Share Posted January 29, 2020 telnet login is often the problem here. can be access under tool and integration in ra software then update the credentials in composer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.