terminaldisclaimer Posted January 31, 2020 Share Posted January 31, 2020 On 1/29/2020 at 1:12 PM, RyanE said: You also could add Experience Button (UIButton proxy) drivers in your project that you would then favorite, and have their programming switch your remote to a different room. The big drawback to that is that those same favorites will appear on your T3 touchscreens and on-screen, and will still cause your remote to switch rooms (which may or may not be what you'd want). RyanE What if you wanted to implement this functionality on multiple Neeo remotes? How would you know which remote pressed the button? Quote Link to comment Share on other sites More sharing options...
RyanE Posted January 31, 2020 Share Posted January 31, 2020 4 hours ago, terminaldisclaimer said: What if you wanted to implement this functionality on multiple Neeo remotes? How would you know which remote pressed the button? Unfortunately, that's where this breaks down and Remote Focused Buttons work better, as they are only on one specific remote. RyanE Quote Link to comment Share on other sites More sharing options...
Atrunco Posted February 1, 2020 Share Posted February 1, 2020 On 1/25/2020 at 12:40 PM, Gary Leeds UK said: We have 4 TS3 ~ had issues with the Nero when given one to test early days. Are we saying now that a neeo is worth buying ? I replaced my recently installed T3 in our primary watching area and couldn’t be happier. For things where I need the app, my phone or iPad are always nearby, but this remote is far more responsive for AppleTV controls and volume. Even able to setup custom buttons for aspect ratios and lighting scenes for direct access while watching so there are fewer steps for these frequently used items. I wouldn’t mind a way to lock the screen as someone else suggested because I have inadvertently hit the custom buttons while watching and the room lights come on full bore by accident. Quote Link to comment Share on other sites More sharing options...
South Africa C4 user Posted February 10, 2020 Share Posted February 10, 2020 On 1/28/2020 at 7:37 PM, Cyknight said: Reset NEEO: press and hold the power button until it resets (it feels like 30 seconds or more, but it will go) Thanks! This was useful. Mine hung for the first time... I held it for about 5 seconds and it went off. Stayed blank forever. Held it for another second or two and it came back on... Quote Link to comment Share on other sites More sharing options...
South Africa C4 user Posted February 10, 2020 Share Posted February 10, 2020 How does one change the WiFi Network on the Neeo? I want to try it on our 5G network and see if that is an improvement... Quote Link to comment Share on other sites More sharing options...
Cart Posted February 10, 2020 Share Posted February 10, 2020 26 minutes ago, South Africa C4 user said: How does one change the WiFi Network on the Neeo? I want to try it on our 5G network and see if that is an improvement... Turn off the remote, then press the physical power button to turn it back on again. While the remote is starting up, press and hold the physical BACK button until you see the prompt, “Hi, nice to meet you." You have to go through first time setup to make a network change. South Africa C4 user 1 Quote Link to comment Share on other sites More sharing options...
dinom Posted February 10, 2020 Share Posted February 10, 2020 NEEO only supports 2.4GHz from what I’ve read. Cart, RyanE and South Africa C4 user 2 1 Quote Link to comment Share on other sites More sharing options...
South Africa C4 user Posted February 10, 2020 Share Posted February 10, 2020 14 minutes ago, dinom said: NEEO only supports 2.4GHz from what I’ve read. Thanks. I think you are right as it does not see my 5G network at all! Quote Link to comment Share on other sites More sharing options...
Cart Posted February 10, 2020 Share Posted February 10, 2020 21 minutes ago, dinom said: NEEO only supports 2.4GHz from what I’ve read. This is correct. 2.4 has a more widespread spectrum that penetrates materials better than 5 GHz which is why Control4 wanted to stay away from 5 GHz with the Neeo. Neo1738 and South Africa C4 user 2 Quote Link to comment Share on other sites More sharing options...
WisC4 Posted February 11, 2020 Share Posted February 11, 2020 Now that we have volume feedback on the Neeo, is there any technical limitation for doing the same on the legacy remotes (260, etc)? Quote Link to comment Share on other sites More sharing options...
Cyknight Posted February 11, 2020 Share Posted February 11, 2020 4 minutes ago, WisC4 said: Now that we have volume feedback on the Neeo, is there any technical limitation for doing the same on the legacy remotes (260, etc)? Two different beasts altogether. I doubt we'll ever see it on the current SR remotes. Quote Link to comment Share on other sites More sharing options...
BraydonH Posted February 11, 2020 Share Posted February 11, 2020 16 minutes ago, WisC4 said: Now that we have volume feedback on the Neeo, is there any technical limitation for doing the same on the legacy remotes (260, etc)? I think the excuse would be that it would use too much battery... dunno Quote Link to comment Share on other sites More sharing options...
WisC4 Posted February 11, 2020 Share Posted February 11, 2020 2 hours ago, BraydonH said: I think the excuse would be that it would use too much battery... dunno why would it be any different than showing the percentages like for lighting? lights have real time feedback on the legacy remotes... Quote Link to comment Share on other sites More sharing options...
msgreenf Posted February 11, 2020 Share Posted February 11, 2020 Why would they continue developing the products when the next generation remote is out? Quote Link to comment Share on other sites More sharing options...
WisC4 Posted February 11, 2020 Share Posted February 11, 2020 1 minute ago, msgreenf said: Why would they continue developing the products when the next generation remote is out? I would be surprised if they didn't continue to develop the 260 as an alternate to the neeo. Without any buttons Neeo is a niche product. But maybe 260 just isn't sophisticated enough...although it seems like it might be (based on lighting feedback). Quote Link to comment Share on other sites More sharing options...
msgreenf Posted February 11, 2020 Share Posted February 11, 2020 IMHO 260 is a fully baked product. Will they release a 270? Idk. Quote Link to comment Share on other sites More sharing options...
RyanE Posted February 12, 2020 Share Posted February 12, 2020 You should probably not hold your breath waiting for updates to the SR260. RyanE Quote Link to comment Share on other sites More sharing options...
Kaas Mayer Posted February 12, 2020 Share Posted February 12, 2020 Its right now not possible to add rooms to the actual Zone, like sr260. Am i right? Quote Link to comment Share on other sites More sharing options...
RyanE Posted February 12, 2020 Share Posted February 12, 2020 11 minutes ago, Kaas Mayer said: Its right now not possible to add rooms to the actual Zone, like sr260. Am i right? That is correct. Session management is not available currently, although it is an oft-requested feature, and one likely to be released in the future. RyanE Quote Link to comment Share on other sites More sharing options...
Kaas Mayer Posted February 13, 2020 Share Posted February 13, 2020 I had some non c4 Neeos before and i like the c4 neeo aswell. (got one) but there is still so much potential left for this device. South Africa C4 user and RyanE 2 Quote Link to comment Share on other sites More sharing options...
Baubas Cat Posted February 18, 2020 Share Posted February 18, 2020 Is there a way to disable the screen from turning on when the remote is moved? Quote Link to comment Share on other sites More sharing options...
LollerAgent Posted February 18, 2020 Share Posted February 18, 2020 8 minutes ago, Baubas Cat said: Is there a way to disable the screen from turning on when the remote is moved? Don't believe so. But - yeah, it's way too sensitive at times. Quote Link to comment Share on other sites More sharing options...
Baubas Cat Posted February 18, 2020 Share Posted February 18, 2020 I use the hard buttons more than the screen. It would be nice to have an option to toggle the screen instead of it always just coming on. Quote Link to comment Share on other sites More sharing options...
ILoveControl Posted February 18, 2020 Author Share Posted February 18, 2020 Totally agree with ability to lock the screen, the screen is so sensitive I have my front gate and garage door opening and closing buttons, on the front page they always opening by mistake Quote Link to comment Share on other sites More sharing options...
ECS Posted February 18, 2020 Share Posted February 18, 2020 Has anyone been noticing lockup’s in their remotes? Mine has frozen twice this week. Never had the problem before and my system has not changed. Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.