Alarm Song

[Studio5150]

Hi everyone, 

I use NCZ-3011 for door detection, and I make a macros "Alarm start", when the alarm in ON... and if someone opens the door I start the macro:

- I put strip led of the room in red and blinking;
- I make a vocal announcement "You are in a restricted zone !!! ";
- I send a push notification "Alarm : Door XYZ Open"

And for the last "step" I will add a alarm song. How can I do that ?
First I thinking to add a MP3 into my nas server and -> Select Media -> Album -> alarm song.mp3... but the problem on the T7 of the room ou can stop the song... easy enough for the intruder to stop the alarm. Second, I thnking about a announcement with the mp3 ... BUT if I start a announcement can I stop it ? (the MP3 alarm is a loop song of 1 hour long... :))

Have you a Idea ?

Thanks.

[brucecampbell]

Sounds like fun to enter a restricted zone at your place

 

[Matt Lowe]

5 hours ago, Studio5150 said:

Hi everyone, 

I use NCZ-3011 for door detection, and I make a macros "Alarm start", when the alarm in ON... and if someone opens the door I start the macro:

- I put strip led of the room in red and blinking;
- I make a vocal announcement "You are in a restricted zone !!! ";
- I send a push notification "Alarm : Door XYZ Open"

And for the last "step" I will add a alarm song. How can I do that ?
First I thinking to add a MP3 into my nas server and -> Select Media -> Album -> alarm song.mp3... but the problem on the T7 of the room ou can stop the song... easy enough for the intruder to stop the alarm. Second, I thnking about a announcement with the mp3 ... BUT if I start a announcement can I stop it ? (the MP3 alarm is a loop song of 1 hour long... :))

Have you a Idea ?

Thanks.

could just set the T3 touch screen to a blank background. good change they will likely not know to turn it off and stop the siren. Could also manually turn everything on and not use the room controls and c4 will not think any rooms are on and none of the media controls will work.

[Studio5150]

I will test the manual launch and see if the T7 displays something.

[neil12011]

On 2/27/2020 at 12:45 PM, Studio5150 said:

Hi everyone, 

I use NCZ-3011 for door detection, and I make a macros "Alarm start", when the alarm in ON... and if someone opens the door I start the macro:

- I put strip led of the room in red and blinking;
- I make a vocal announcement "You are in a restricted zone !!! ";
- I send a push notification "Alarm : Door XYZ Open"

And for the last "step" I will add a alarm song. How can I do that ?
First I thinking to add a MP3 into my nas server and -> Select Media -> Album -> alarm song.mp3... but the problem on the T7 of the room ou can stop the song... easy enough for the intruder to stop the alarm. Second, I thnking about a announcement with the mp3 ... BUT if I start a announcement can I stop it ? (the MP3 alarm is a loop song of 1 hour long... :))

Have you a Idea ?

Thanks.

Based on the 5150 handle, I'm going to go out on a limb and say this will/should be a Eddie Van Halen song.

[Studio5150]

12 hours ago, neil12011 said:

Based on the 5150 handle, I'm going to go out on a limb and say this will/should be a Eddie Van Halen song.

HAHAHAHAHA  I thinking first something more "Agressif". The goal is to scare away intruders