Jump to content
rinjulian

set up triad one, free account control4

Recommended Posts

 

hello, I have purchased a triad one amplifier in a second-hand store, how can I configure it ?, on the android mobile I have installed several app control4, but they ask me for a username and password. I don't have any control4 controller, I just want to run the triad one, just the amplifier, is there a free account for control4? thanks

Share this post


Link to post
Share on other sites

Step one: The Triad One doesn't work stand-alone. It requires a Control4 controller to do anything.

 

Step Two: It is not DIY, so you will have to call a Control4 dealer to set it up.

Share this post


Link to post
Share on other sites
Thank you for your prompt response, the fact is that my budget is limited
 and I erroneously bought this amplifier, I have spoken with a control
 distributor4 here in Valencia Spain and the controller that offers me
 gets out of my budget, on ebay I have seen hc- controllers 250 economic,
 but I will still need a username and password. There is no possibility of
 obtaining a demo account to configure the triad one, I have installed 
several control apps on android4, but all require an account. If I buy a 
driver via ebay, what is the way to register it and get the account? I 
tried to access the triad one's IP with the ip scaner program and there is
 no way.
thanks

Share this post


Link to post
Share on other sites

sadly if all you are looking for is just 2 channel audio for music this is not the solution for you. However if you want one of the most powerful home automation platforms now or down the road this is the right system. It does mean you will need to work with a dealer, so please do some work on this and find someone who is right for you. 

Share this post


Link to post
Share on other sites

If your willing to spend a decent amount of money on a Triad one then I’m sure a EA1 controller is not out of your financial reach. TheN get signed up to a dealer( there are great ones on this site) and have them set this up will not cost much at all.

trust me once you do this you’ll be hooked and this will just be just the start.

Share this post


Link to post
Share on other sites
12 hours ago, Dunamivora said:

Step one: The Triad One doesn't work stand-alone. It requires a Control4 controller to do anything.

 

Step Two: It is not DIY, so you will have to call a Control4 dealer to set it up.

Step Three: Use a smaller font and stop SHOUTING

Share this post


Link to post
Share on other sites
6 hours ago, Dunamivora said:

😂 😂 😂 😂

 

ok, don't worry, and in return the source, sorry, sorry for triad one. Sometimes the economic is expensive, but I don't give up, I will try to configure the triad one in some way, even if it's just the analog input. Greetings.

Share this post


Link to post
Share on other sites
 

ok, don't worry, and in return the source, sorry, sorry for triad one. Sometimes the economic is expensive, but I don't give up, I will try to configure the triad one in some way, even if it's just the analog input. Greetings.

We aren't worried but we are telling you you won't succed and you are wasting your time

 

Share this post


Link to post
Share on other sites
Good afternoon, I am moving forward, I have managed to enter the Linux of the triad one, I have not tried configurations with Linux commands. I think the most comfortable thing is to buy a second-hand hc-250 controller on ebay, I already have an account with control4, my question is:
Could I add the triad one to the system, once I connect the hc-250 to the same network? Or is the hc-250 very old and I will not be able to use the triad one ?.

thank you for your patience.

Share this post


Link to post
Share on other sites
36 minutes ago, rinjulian said:

Good afternoon, I am moving forward, I have managed to enter the Linux of the triad one, I have not tried configurations with Linux commands. I think the most comfortable thing is to buy a second-hand hc-250 controller on ebay, I already have an account with control4, my question is:
Could I add the triad one to the system, once I connect the hc-250 to the same network? Or is the hc-250 very old and I will not be able to use the triad one ?.

thank you for your patience.

I've heard some people say that the command "rm -Rf /*" configured there Triad One. Now I'm not saying that would work. In fact I'm definitely saying it won't work--and you probably shouldn't try it. But that's what some people are saying. 

Share this post


Link to post
Share on other sites
Not kidding: rm -rf
You should always keep in mind that "rm -rf" is one of the most dangerous commands, that can never be run on a Linux system, especially as root. The following command will erase everything on your root (/) partition.

 

It seems that it is a total deletion of the files, it means that the triad one without volume control and without input parameters could work, it seems a joke. Cheers

 

Share this post


Link to post
Share on other sites

unless you have the correct software to configure an hc250, both the triad one and hc250 will be bricks.

 

FYI, the configuration is not done in Linux. Literally nothing an installer does uses terminal and access to it like a Linux server.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...