AJ_ Posted June 28, 2020 Share Posted June 28, 2020 I have a Nutone Chime Bell and just installed the DoorBird D101 today using PoE. The DoorBird has a connector for ‘bell’ and I can’t find any information on how to connect it to the chime bell so the Nutone bell also works when someone rings the doorbell. Do I simply have to connect the wires from the old push button door bell button (red and white) to the ‘bell’ connector? I would think the bell connector slot is simply completing the circuit, just as the push button doorbell button did. Any more information would be helpful and is appreciated. Thanks! Quote Link to comment Share on other sites More sharing options...
lukas.polivka Posted June 28, 2020 Share Posted June 28, 2020 From the DoorBird D10x installation manual: Quote Conventional electric door chime If someone rings your video door station, you will immediately receive a push notification with sound/vibration on your smartphone or tablet. In addition the video door station comes with a zero-potential relay contact for connecting a conventional electric door chime inside the building. The relay contact can be used to activate the separate operating voltage of the door chime or the door chime via its trigger input. If the operating voltage of the door chime is activated, it should not be greater than 24 V (AC/DC). The power consumption should not exceed 1A. The video door station does not provide its own power supply for the door chime. This is provided through the separate power supply of your conventional door chime. Should you have any questions, please contact the manufacturer of your door chime. You can find compatible door chimes and a sample wiring diagram at www.doorbird.com/support Quote Link to comment Share on other sites More sharing options...
AJ_ Posted June 28, 2020 Author Share Posted June 28, 2020 Thanks but I saw that already. If the power to the button is 24v or under it looks like I can simply connect it so the bell relay contact will behave like the push button. Quote Link to comment Share on other sites More sharing options...
AJ_ Posted June 29, 2020 Author Share Posted June 29, 2020 Got this done today. Quote Link to comment Share on other sites More sharing options...
JrGold Posted September 12, 2020 Share Posted September 12, 2020 @achoudhary Did this work? You just connected the blue “bell” wires to the low voltage line from the NuTone main unit? Quote Link to comment Share on other sites More sharing options...
vengatesan Posted September 16, 2023 Share Posted September 16, 2023 outdoor doorbird how to connect indoor extra normal calling bell Quote Link to comment Share on other sites More sharing options...
AJ_ Posted September 16, 2023 Author Share Posted September 16, 2023 6 hours ago, vengatesan said: outdoor doorbird how to connect indoor extra normal calling bell Gosh. I don’t really remember anymore but check the manual for both the devices. I have since upgraded to the C4 doorbell. Much better. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.