grant0830 Posted April 16, 2021 Share Posted April 16, 2021 Question for you all, we have some triad silver stats in a 9.2 set up running off a Marantz. When I run the Audyssey set up I noticed that front right and rear right speakers are very loud compared to the other speakers when preforming the setup. I then have this crackling from the front right when audio is playing through them. Is this a speaker issue or a receiver issue? Or both. thank you in advance!! IMG_7658.MOV Quote Link to comment Share on other sites More sharing options...
WeitzC4 Posted April 16, 2021 Share Posted April 16, 2021 I would personally switch the speaker channels on the amplifier and see if the static follows the speaker or stays at the location of issue. Help narrow down the issue to diagnose further. Quote Link to comment Share on other sites More sharing options...
grant0830 Posted April 16, 2021 Author Share Posted April 16, 2021 Good call! I swapped the Front Left speaker wire for the Front Right at the receiver and now no popping or cracking. Would this lead you to think the issue could be with the speaker wire or receiver? Quote Link to comment Share on other sites More sharing options...
WeitzC4 Posted April 16, 2021 Share Posted April 16, 2021 If I were a betting man I would say it's the amplifier, doesn't sound like it's blown if your swapped the leads and no distortion is noticed in speakers. If it were the wire it would more than likely just be shorting out and cause the amp to go into protect mode, so I doubt it's the wire. Quote Link to comment Share on other sites More sharing options...
lippavisual Posted April 16, 2021 Share Posted April 16, 2021 Mis wired maybe? Quote Link to comment Share on other sites More sharing options...
grant0830 Posted April 17, 2021 Author Share Posted April 17, 2021 I don’t think the wires where originally reversed because the correct speaker would play during the audyssey set up. Now that I reversed the front right and front left both speakers seem to be playing audio fine. Who knows? Quote Link to comment Share on other sites More sharing options...
grant0830 Posted April 17, 2021 Author Share Posted April 17, 2021 It appears to be a issue with the SR7010 Marantz. Looks like others have had this issue with cracking popping on these receiver Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.