tgrandahl Posted March 11, 2022 Share Posted March 11, 2022 Hi folks, first of all, thanks for compiling such a wealth of information in the form, its been an incredibly valuable resource to reference! I've run into some difficulty using some older wall switches (C4-SW1 and C4-SW2) in an OS 3.1.3 project. I'm using them with the 'switch_gen3.c4i' and 'C4-V-SW120277.c4z' drivers. The basic functionality of controlling the switch state works with these drivers, but I'm finding that the ability to manipulate the LEDs on the switch does not. In addition these devices don't identify when attempting to bind a connection, the MAC must be manually entered to get them to bind, which I suspect is an indication that these aren't the intended drivers for these devices. So my question is this - does support for the C4-SW1 and C4-SW2 officially exist in OS 3.x and if so, what driver is it expected to be used with? Tyler Quote Link to comment Share on other sites More sharing options...
RAV Posted March 11, 2022 Share Posted March 11, 2022 All zigbee lighting supported in OS 3.x Drivers start with LDZ LSZ tgrandahl 1 Quote Link to comment Share on other sites More sharing options...
tgrandahl Posted March 16, 2022 Author Share Posted March 16, 2022 Thanks Rav! That was the tip I needed, switched drivers and all is working well now, they show up as an LSZ-101 and self identify as normal. Quote Link to comment Share on other sites More sharing options...
Cyknight Posted March 16, 2022 Share Posted March 16, 2022 Just to clarify for other readers, all of the 'old style' lighting devices simply use the same drivers, regardless of revisions. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.