willl Posted March 5, 2010 Share Posted March 5, 2010 Anybody knows what is the power requirment for C4 4 zones and 8 zones amp?from the spec sheet it only says 8 zones220 watt per channel for 4 ohms (16 channels)110 watt per channel for 8 ohms (16 channels)I do not think that the unit can handle 16 x 220 watts at once (3520 watts).AC for interneational version (230 volts)Thanks in advance, Link to comment Share on other sites More sharing options...
jberger Posted March 6, 2010 Share Posted March 6, 2010 From the knowledge base on 120v:16 Channel Amplifier: 10 Amps (16 channels with 8 ohm loads) 1200 watts, 4095.48 BTU/hr, 26 watts when idle4 Zone Amplifier: 4 Amps (8 channels with 8 ohm loads) 600 watts., 12 watts when idle not in power saving mode. 6 watts in power saving mode Link to comment Share on other sites More sharing options...
willl Posted March 8, 2010 Author Share Posted March 8, 2010 thanks jbergeri think for 230v, it could at least yield the same watt, if not higher. Link to comment Share on other sites More sharing options...
jberger Posted March 9, 2010 Share Posted March 9, 2010 I would guess it would be about the same. I have not traced the boards involved, but I'd bet that it's just an autoranging power supply that delivers exactly the same output regardless of the incoming voltage. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.