Jump to content
Sign in to follow this  
tratliff

My C4 system isn't working ! Zigbee issue?

Recommended Posts

I resently changed a dimmer at control4 and the did not have the old ones so they gave me the new pro coz the old once where discontinued. But I do understand that I should get the same one. But what if...I'm only speculating.

Share this post


Link to post
Share on other sites

I have same problem. All remotes stopped working and say waiting for network. iPad can control Tv on Hc300 but not lights or music. Tried rebooting router, hc300 and removed batteries from remotes. Still not working. Any thoughts?

Share this post


Link to post
Share on other sites

There are some known issues with 2.00-2.02 on certain controllers where the system becomes sluggish and parts or all of the zigbee mesh become unresponsive. 2.04 is sceduled to be released on Tuesday which is supposed to fix systems with this particular issue. There is also an SNMPD patch available to fix this now but you may as well wait for the 2.04 maintenance release and have the system upgraded. This fix doesn't apply to systems on 1.8.

Your dealer will be able to check to see if you are affected by this.

Share this post


Link to post
Share on other sites

^Thank God. After spending $2000 to upgrade and thinking nobody will pay any attention, I'm glad to be reading this. I've got all the problems mentioned above :(

Share this post


Link to post
Share on other sites

Nikon, thanks so much for the info. Very good to know. Wish we would have known about this earlier.

Like Controlfouruserguy, I am very frustrated that we are still having issue like this. I was hoping our days as beta testers for a new release were over. The more things change, the more they stay the same.

Share this post


Link to post
Share on other sites

Unfortunately, despite Control4 having literally *hundreds* of beta test sites for 2.0 (and previous releases), it's very difficult to catch this sort of problem, which doesn't manifest itself until the system has been running for at least a few weeks without reboot.

I apologize for these issues you're seeing.

RyanE

Share this post


Link to post
Share on other sites
Unfortunately, despite Control4 having literally *hundreds* of beta test sites for 2.0 (and previous releases), it's very difficult to catch this sort of problem, which doesn't manifest itself until the system has been running for at least a few weeks without reboot.

I apologize for these issues you're seeing.

RyanE

I had to have my dealer out twice after zigbee totally failed and each switch had to be reloaded. I am now on 2.02 and recently had the entire audio driver corrupted for no know reason which made any announcements or playing music impossible. Both of these have been temporarily corrected, but the system has been anything but reliable and I just hope this can all be resolved with some bug fixes. Its just unnerving not knowing whats not going to work next. I have had more down time than anyone wold believe. I never expected Control4 to be this unreliable, however I am hopeful that some of these bugfixes finally correct things.

Share this post


Link to post
Share on other sites
Nikon, thanks so much for the info. Very good to know. Wish we would have known about this earlier.

Like Controlfouruserguy, I am very frustrated that we are still having issue like this. I was hoping our days as beta testers for a new release were over. The more things change, the more they stay the same.

Hey no problem. I am glad to be able to shed some light on the situation by passing on the information.

Share this post


Link to post
Share on other sites
yes, I rebooted all the equipment: HC300's, router, switch, etc. Everything.

yes, took batteries out of remote.

But it is not just the remote. the lights and lighting scenes don't respond either (except for manually pushing the switch of course). MTS's work but 6-buttons don't.

I also think so.thanks

__________________

watch free movies online

Share this post


Link to post
Share on other sites

It seems that the level on spam on the forum has grown lately...very annoying.

A good idea might be setting it up so that new users can't post links...in their signature or otherwise. I've seen that reduce the spam on other forums...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...