trippinbillies4 Posted September 2, 2007 Share Posted September 2, 2007 Hey all. I recently added a Vista128BP to one of my client's systems. For the frist week, he had 7 zones on the system. Everything worked just fine. I made a room called "security center" and dropped all the contacts in there, and made the correct bindings, everything was perfect. Thhheeennnn he had the security system expanded into 32 zones, and it stopped working correctly. Zone 1 doesn’t work at all through c4 (it’s the foyer motion) and zones 17 and up loop back starting at zone 11. IE: Tripping zone 17 actually shows up as zone 11 tripping in C4, zone 18 shows as 12. Zones 11-16 work correctly too, so if you trip zone 11, it actually shows up as zone 11 on screen. On the Honeywell side, it all works perfect. If you trip any zone, it shows up as the correct zone on their keypad. I took the system and the contacts out of the project and reentered them, the same problem still occurs. Any ideas on this one?? It's freally frustrating us. Link to comment Share on other sites More sharing options...
barbecuesteve Posted October 21, 2009 Share Posted October 21, 2009 My Vista 128BP doesn't work either. The system detects an "Alarm Disable" event and sets the living room lights accordingly, but that's all. I have 19 zones. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.