loudsubz Posted January 15, 2008 Share Posted January 15, 2008 I have a MTS and Remote in a customers bedroom.The remote functions just fine, press the "4" and it goes to the screen and when you select Cable it turns on the PVR and TV and everything is hunky dory.The problem lies when I select the same thing from the MTS. It turns on the PVR, turns on the TV and switches the receiver input. It waits a few seconds and then selects the proper input on the TV, but then adds a "2" to the command so after it switches to Comp 1, it then adds a "2" so the TV switches to Antenna 2 and displays fuzz on the screen.I can't seem to get rid of this issue and have no idea why its happening. I have looked through programing but I have not addes a NUMBER_2 to anything.The only thing that I have a "2" in, is the 8300HD Driver. Customer wanted the TV to turn to CH 24 when the TV turns on. I have it to power "0", then "2" then "4" to power on the PVR to 24. If it works 100% with the remote shoulnd't it work the same with the MTS? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.