Jump to content
C4 Forums | Control4

Looking for a dealer/installer, to help my DIY C4 installation


id4

Recommended Posts

All,

I am currently looking for a dealer/experienced installer in the greater Atlanta area, who would work with me on "DIY install of my C4 system", which would control/drive:

1) Two HT setup with a Plasma and a LCD,

2) 8 zone whole house audio (will be installing in-ceiling, in-wall and bookshelf speakers),

3) 2 zone climate control,

4) 8 zone Security system (replacing existing Brinks with DSC or GE Concord) with 3 IP POE video surveillance cameras,

5) ELK doorbell/tel ring detector (930/960)

6) Garage door contacts

7) Two Fire place relays

8) Hunter-Douglas Motorized Windows shades (3 banks of 3 windows each)

The house is already pre-wired for all these setup (speakers, at least 3 cat6 drops in all the rooms, contact, relay drops for doorbell, cameras, fireplaces, garage overhead doors) and are "homerun" to the basement. All the equipments would be installed on a Middle Atlantic rack in the basement, will be routed/switched by Linksys router/ap/switch (WRVS4400n, SAP4400n, SRW2024P) and will be powered Panamax 5400-EX.

If any of you dealers/installers interested in this project, please PM me.

Thanks

Link to comment
Share on other sites


Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.