evoltin Posted February 17, 2008 Posted February 17, 2008 Hi, I have the new 3rd version of the multichannel amp. I just had it hooked up, but when I select the room I want within Composer (say room 1, and imput 1)...then on the AMP rooms 1 and 2 turn on to inputs 3 and 4. Essentially, output 1 in composer turns on 1 and 2 on the amp? This continues and room 2 turns on outputs 3 and 4...etc. What is going on here...any suggesstions?
issixit Posted February 18, 2008 Posted February 18, 2008 Check and see if under system design, when the amp is selected, if the inputs are locked. If they are, double click on the amp and check to see how they are locked. It could be possible that input 1 is locked to outputs 1&2, input 2 to outputs 3&4. I would check this, first. You can click the boxes to relock them to the correct inputs. Or if you are using the amp as a switcher, then unlock the inputs.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.