Strongbad Posted March 9, 2008 Share Posted March 9, 2008 Hey Guys,Just installed ME 1.3.2, and can't get my director it to show up on the list.The controller was originally set to dynamicIP and was reporting 'connected' to the remote access systemWhat I've tried so far:- manually entered the IP- tried setting the IP manually and rebooting, this disable the remote access (reports disconnected).- connecting my laptop to the router via a hardline- updating the firmware via the update serviceAlso - on another post a user suggested starting composer in Virtual Mode - my current software shows this option (as well as remote access) but they are both greyed out - how do I start in virtual mode???Thanks in advance.--"Nothing is written." T.E. Lawrence Link to comment Share on other sites More sharing options...
mrpugh Posted March 19, 2008 Share Posted March 19, 2008 You cant start virtual mode in Media Edition. Its only for local use by the system owner. He's probably talking about Composer Pro edition.Do a test to make sure your laptop and the controller are on the same network. In windows: START > Run. In there, type cmd and click OK.A DOS type window will show up. Now type: ping 192.168.0.14 or whatever the ip of your controller is set to. Then press enter. You should get 4 replies from your controller if it is on the network.If this doesnt give you any joy. Check that the subnet mask and default gateway are the same as your laptop. Make sure the controller network connections are firmly plugged in (I spent half an hour yesterday doing the same thing) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.