Jump to content
C4 Forums | Control4

4" touchscreen has no display


Recommended Posts

Hello,

I have a small 4" touch panel (with scroll wheel and small white button) and the POE ac adapter has two binking lights (one green and one amber) as if it is hibernating or something. Everything was working fine but now it is not turning on for some reason. How does the small white plastic cover come off?

Thank you.

Link to comment
Share on other sites


I'm having a similar issue since upgrading to 1.6 . It will work for awhile but after a bit it will either lock up or go blank and not come back on. I either have to reboot or pull the power. Did your problem start after the 1.6 upgrade?

Link to comment
Share on other sites

If they are the ethernet units they are POE. THe power is injected over the cat5 line. You can unplug that from either side. The other way to reboot those units is to hold the big knob down for like 10-15 seconds and it reboots.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.