avwilliestyle Posted January 28, 2006 Share Posted January 28, 2006 I have a stewart screen with masking. It has a 4 input relay. UP DOWN STOP. C4 only has 3 way inputs UP DOWN. Isn't there a way to wire this using two 3 input relays? If so then how?Thanks Link to comment Share on other sites More sharing options...
danlevine Posted January 28, 2006 Share Posted January 28, 2006 I think you would need to use three relays. I'm not sure if it will work but in my mind it does.Here is a high quality image. ----- Relay 2Relay 1 ---| ----- Relay 3You would have three statesContact A onContact B onBoth Onand Off Link to comment Share on other sites More sharing options...
avwilliestyle Posted January 28, 2006 Author Share Posted January 28, 2006 Thanks but I am a little fuzzy on what you are saying. I know they have a driver written for dual relay which if I am not mistaken is exactly what is designed for this app. you sare the common over both relays and then you are left with two opens and two closes and three wires an up wire down wire and a stop wire. So i need to fiqure out which of the following wires go where. I am trying all combos now so I update if I fiqure it out Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.