shakaZOLO Posted February 14, 2006 Share Posted February 14, 2006 Has anyone worked with SIVOIA motorized shades yet with C4. I've got a panel that has 10 shades terminated. I want to have 6 button keypads control them in multiple locations.....I'd love to talk to you directly if you'd done this. Link to comment Share on other sites More sharing options...
ZitoMD Posted March 26, 2008 Share Posted March 26, 2008 You have two options. First is to send IR commands. Second is to use the relay outputs of the C4 to the input board interface from Lutron. See attachment. Link to comment Share on other sites More sharing options...
danlevine Posted March 28, 2008 Share Posted March 28, 2008 Use CCI8 Boards for Dry Contacts or get a Serial Interface Module. Link to comment Share on other sites More sharing options...
fitzgibbon Posted April 13, 2008 Share Posted April 13, 2008 There are 3 ways to control the shades.1. is through Lutron Homeworks software andthe integration of a Q06 module which will not work with C42. is to use the Sivoia CCI 8 and Relays from Control 4 as Dan mentioned. I would suggest this method. The CCI 8 comes with 8 contact closures. The default is the following. Open, close, raise, lower, stop, preset 1, preset 2, and preset 3. You can switch the dip switches to change this. for example if you had 2 groups of shades you could have it be set to have 2 groups each group would have open, close, raise and lower.You can also have 4 groups of open and closeOr 2 groups of open, close, stop, preset 13. would be IRLutron does not make a serial interface moduleThe CCI8 and relays will be best solution. But it can get expensive when doing a large amount of shades and groups Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.