Jump to content
C4 Forums | Control4

Adding DS2 to Dahua NVR


Recommended Posts

Hi chaps,

I have a DS2 on the network and a Dahua NVR.  Trying to get the DS2 camera onto the NVR so that i could record footage etc.  

Added the camera under registration as an Onvif feed.  IP Address of DS2 added.  I have gone into the DS2 menus and under the onvif tab allowed access and an admin plus password.  All this has been entered into the web login and the status now has a green tick as D2 for the camera.  However, there is no feed.  Just a blank page and i have hit a brick wall.  Could anyone please advise?  I have matched the image display into the dahua portal for the camera but still nothing.  No image.  

Link to comment
Share on other sites

  • 7 months later...

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...