rdmzmorgan Posted August 14, 2010 Share Posted August 14, 2010 I own the KD Fat Boy 4x2 Matrix Switcher using the KD Baluns to send Component video over Cat5e to a plasma and lcd tv. Over the past week or so I have been noticing dark vertical and horizontal lines passing through my video signal, both dvds and cable. It is not major, but more of a nuisance. Nothing has changed in my set-up in over 2 years.Has anyone ever experienced this? If so, how was it resolved. I have restarted the Switch in the hopes that a restart might help this situation, but it did not.Any guidance would be greatly appreciated. Link to comment Share on other sites More sharing options...
jgavin Posted August 14, 2010 Share Posted August 14, 2010 I don’t know about the KD but working with Sonance matrix they have a small tuning screw built into the breakout wallplate to adjust long/short runs. If nothing has changed in 2 years could be a transformer going out in your case. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.