pstuart Posted February 27, 2011 Share Posted February 27, 2011 Ok, so upgraded to 2.06 and now the honeywell driver needs to be armed twice to set, first time, it just beeps, second time arms.What is even more interesting, is that when you disarm, it actually arms again the first time, then the second time it disarms.Any ideas? Link to comment Share on other sites More sharing options...
JR Posted February 27, 2011 Share Posted February 27, 2011 Check your programming and see if it is still correct, was anything recently changed with the alarm system? Quick arming is it enabled or not and has that been changed? Try using virtual keypad and see what results you get. Are you using any delays between keystrokes? Link to comment Share on other sites More sharing options...
pstuart Posted February 27, 2011 Author Share Posted February 27, 2011 Yeah, nothing changed, just the upgrade.The behavior is the same using the virtual keypad or a touchscreen. No delays between keystrokes. Link to comment Share on other sites More sharing options...
pharmdsmith Posted February 27, 2011 Share Posted February 27, 2011 Are you using the vista/icm driver? Mine has worked on all 2.0.x and 2.1.x versions Link to comment Share on other sites More sharing options...
pstuart Posted February 28, 2011 Author Share Posted February 28, 2011 It's actually a Honeywell vista 250 fpb or something like that.Was fooling around with the settings and now it seems the problem is gone, I'll keep an eye on it for a bit. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.