ruckus Posted February 11, 2007 Share Posted February 11, 2007 I had a thermostat replaced un der warranty because the first one was going through batteries. When the first one was installed it was calibrated because the temperature read is in accurate. The installer forgot to do this on the new thermostat. I really don't want to bother them again especially since I remember the process being fairly easy. I just can't remember the details. I know you take out battery and then hold down two of the buttons (not sure which ones) then reinstall battery and the rest I can't remember. Can anyone fill in the details for me. As always thanks for the help. Link to comment Share on other sites More sharing options...
Jared Posted February 11, 2007 Share Posted February 11, 2007 you need to power cycle it, so remove the battery, put it back in et . Then hold the two outside buttons.you can then adjust the temp using the up and down buttons and then hit the middle button when you done.Hope that helps.Jared Link to comment Share on other sites More sharing options...
ruckus Posted February 17, 2007 Author Share Posted February 17, 2007 Problem solved thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.