sthembiso

Hi, a client C4 Matrix Amp keeps on freezing on a Initializing state. Could it be the amp is showing signs of abt to give up? 

This is on composer. Number of aircons states 1 instead of three

Just now, sthembiso said:

Hi please help, I have a site where My Air was installed. I was able to intergrate C4 with the driver I downloaded for Driver Central. But after linking zones in composer. Only one zones responds. The rest only respond on the aircon touch screen installed by the AC guys. 
 

I am not sure but I am suspect iin maybe on their setup side they allow only some one to intergrate to C4 and disallowed the rest. 
 

on composer C4 says Number of aircons 1 instead of 3

Hi please help, I have a site where My Air was installed. I was able to intergrate C4 with the driver I downloaded for Driver Central. But after linking zones in composer. Only one zones responds. The rest only respond on the aircon touch screen installed by the AC guys. 
 

I am not sure but I am suspect iin maybe on their setup side they allow only some one to intergrate to C4 and disallowed the rest. 
 

on composer C4 says Number of aircons 1 instead of 3

On 10/16/2017 at 4:04 AM, alanchow said:

http://server.chowmain.software/images/Logos/Chowmain%20Logo%20Transparent%20Medium.png 

Chowmain - Advantage Air MyAir Driver 

Advantage Air is an Australian based HVAC manufacturer based in Perth, Western Australia that sells HVAC systems in Australia and South Africa. MyAir is Advantage Air’s premium reverse cycle air conditioning system with 10 zones and individual room airflow control. 

Chowmain’s MyAir driver for Control4 will work with all models of MyAir by providing two way control and feedback. 

Features 

• Two way IP control 
• Control of upto all 4 AC units attached to MyAir 
• Room temperature feedback, HVAC mode, Setpoint and Fan control 
• Fresh Air control 
• Timer functionality (Turn on/off AC after x minutes – upto 12 hours). 
• Built in Scheduling 
• Built in Presets 
  
  Control of each zone attached to AC units 
• Set as MyZone 
• Zone can be turned on/off 
• Zone temperature feedback (if sensor available in zone) 
• Zones can have airflow control (for those without temperature sensors) 
• Zones can have setpoint control (for those with temperature sensors) 
  
  FAQ 
  
  Why is this product exciting? 
  We have had alot of requests for this driver from Australian Control4 dealers. Advantage Air is a major HVAC manufacturer in Australia whoses products are heavily utilised in both Western Australia, Queensland and South Africa. Integration of their MyAir product allows for a wider range of HVAC solutions for Australian Control4 consumers and dealers. 
  
  What HVAC systems can i use this driver with? 
  MyAir controls Samsung, Daikin, Fujitsu, LG, Panasonic, Toshiba, Hitachi, Mitsubishi Electric, Mitsubishi Heavy Industries, Carrier and Midea air-conditioners. MyAir’s touchscreen controls both the air-conditioning unit and air management system, so there’s no need for 2 control panels. Talk to your Advantage Air representative today about 3rd party integration solutions. 
  
  Where can i purchase Advantage Air? 
  Advantage Air is sold in both Australia and South Africa. For more information please visit the Advantage Air website 
  Advantage Air Website 
  
  My Advantage Air system has multiple AC's connected to it. Does your driver support multi AC's? 
  Yes our driver will support upto 4 AC's which are connected to the MyAir system. This is the current maximum. 
  
  Can i control individual zones with this driver? 
  Yes our driver automatically imports in all zones associated with the each AC and will allow you to either control the setpoint or control the airflow percentage. One zone should be set as MyZone so that the HVAC system has a reference point. 
  
  Can i do schedule the HVAC system using this? 
  Yes our driver has built in presets and scheduling. The driver can also utilise the built in timer to turn on and off MyAir. 
  
  How do I find out more information about the driver? 
  Please see the links below for more information about the driver. 
  
  Chowmain Website 
  
  Installation Guide 
  
  How do I buy the driver? 
  This driver can be purchased from our distributor driverCentral. 
  
  Download Driver / Purchase Licence 
  
  Who do i contact for technical support? 
  We have two support desks. One in Australia and one in the US. Click on the link below for details. 
  
  Support 
  
  Do you provide trial licences? 
  All Chowmain drivers for Control4 come with a 7 day trial. 
  
  http://server.chowmain.software/images/Screenshots/Advantage%20Air%20MyAir.gif 

Hi, can I ask for advise on what would course this error on Trying to connect on Intercom anywhere. 

I have reset the gateway, sometimes on resetting the intercom service would work for just 24hrs then go back to the decline error.

I assuming the UDL number I  must ask from installer Gary? 

I think there was a point where I inserted a 1234 UDL. Got a connected status on composer but couldn’t go any further

Yes it does 

Not yet, no app has been activated for his panel 

Hi Gary, the guys who isnstalled say they have put the IP module just not sure if it’s right module. Also which driver do I put on composer? Thanks 

Hi All. Anyone who can assist with guide lines on how to intergrate Texecom to C4, please assist. 

I have intergrated Paradox and DSC panels seemlessly overtime on my projects. Now I found myself with a client that has Texecom premier for an alarm system. 

Will appreciate all the help 

Hi, can anyone assist with the Error 480 when trying to connect on mobile phone to DS2/T3 remotely. I keep on getting the error 480 Connection declined. 

Was trying a direct ip intergration to C4. Should I first ask the alarm guys to get the Texecom app working before. 

No not yet 

On 9/24/2018 at 8:23 PM, Shivam Paw said:

What driver as you using?

Whats SmartCom?

What driver version?

Ours is a texecom premier elite with com-ip.

i know there’s a thing where you can only be connected to com-ip with one device. So to connect with Wintex for example I’d have to remove the c4 connection. 

What did you do with the sensors and when you say stopped what do you mean?

Hi I am C4 installer in South Africa. A client has installed Texecom Elite unit. Tried connecting it up with C4 via IP. Can’t seem to win. Any documentation on how to go about this?