jcn

Hello,

is there any driver available for uniview IP cameras? The one driver that is in the data base is not working for me.

Thanks 

On 7/26/2021 at 1:02 PM, Cyknight said:

? Standard driver works fine for me and we've done lots.

One thing to note is is the size of the snapshot image file (can be set in camera - should be 200k)

snapshot url is just [IP]/images/snapshot.jpg

Can you Please share the driver you have the uniview cameras working?

Hello

i have a DCS Power series 1864 integrated with control4, everything is working fine. The question that I have is that if I add the alarm.com cell radio SEM210-ps-at to the panel will this cause any trouble with the integration with Control4.

Thanks in advance for any input. 

56 minutes ago, lippavisual said:

You need to add a new user and password

I did it and nothing..

1 minute ago, Thepritch88 said:

What’s the model of the processor you’re using? I would have thought you’ve got the right one if it was in discovered but you never know.

check the dimmer drivers have HomeWorksQS in the name 

check username and password, you may need to set up a different one that the default 

 

HQP6-2

3 minutes ago, chopedogg88 said:

Make sure you aren't using the default user and password for the processor. And of course set the username and password to the corresponding one that you create in Lutron. 

I call lutron and they said the username and password of the proccessor cant be change.. im using lutron/lutron

1 minute ago, jcn said:

yes. 

Is there a different driver i should be using that are noit in the database?

Just now, msgreenf said:

and you made the bindings? and set the ID numbers?

yes. 

1 minute ago, msgreenf said:

you need one driver per device

Yes. Im just doing a test with one dimmer and Thermostat for now  

I had to add the driver for the dimmer. And i also try adding the driver for the processor manually and nothing..

I used the one that add automatically when you added from the discovered tab and i have used another one that is on the database  

9 minutes ago, msgreenf said:

what isn't working? have you paired your hub with c4?

Yes. i add the IP address for the main processor to my driver on C4.. Is there anything else I'm supposed to do? Also i add the driver for the processor using the Discovered tab on composer.

Hello

I have a system that I'm trying to integrate Lutron HomeWorks with C4 running 3.2.0 but It doesn't seem to be working. I already follow all of the instruction step by step and nothing.. Has anyone here can give me some advise.

Thanks 

On 9/9/2020 at 9:41 AM, cdcllc said:

A while back I posted that my dealer wanted to charge me to come out and plan my garage door integration (still never recovered from MyQ driver fail).  My new plan is to do the design and install myself and have my dealer do the programming plus provide the 2 Z2IOs (I have 2 garage doors).  My request to this group is help reviewing the plan to see if I learned what I was supposed to from all the great previous posts on this topic - thanks in advance.

My goals are to control the opening/closing of the garage doors with Control4, display the current open/closed status of the garage doors, carry over the previous programming I had on buttons related to coordinated lighting, plus introduce new push notifications of door open too long, etc.  The components that I believe will provide those capabilities are:

• 2 x Z2IOs to provide the relay control and contact sensing capabilities; I think I have Zigbee presence in the garages now via switches for outdoor lights plus in the rooms immediately adjacent
• 2 X Liftmaster Security+ 2.0 Dry Contact Adaptors to provide the interface between the Z2IO relay control and Liftmaster motors
• 2 X Rail mounted magnetic contact sensors

I included a diagram of the connections.  I plan to mount the Z2IOs and Dry Contact Adaptors on the ceiling above the Liftmaster motors.  I'm lucky in that as part of the original install, Cat 5 cables were run inside the walls from the garage door safety sensors back to the motors - I plan to utilize an unused pair in the Cat 5 run to get the contact sensors presence back to the Z2IOs.  Power for the Z2IOs will come from the "wall" outlet in the ceiling serving the motors.

The biggest risk I see in the project is Zigbee presence in the garage.  I believe it's there, but I don't have a meter or anything to validate it.  Do SR260's run on Zigbee or wifi?  Maybe I could test control with an SR up by the motor?  Does it look like I have wiring termination points correct?

Here are the specific parts I plan on purchasing:

https://www.amazon.com/dp/B01KYGJT4W/ref=nav_timeline_asin?_encoding=UTF8&psc=1

https://www.garadget.com/product/security-2-0-dry-contact-adapter/

I considered the NYCE tilt sensors, but ended up selecting the magnetic contact sensors so there are no batteries and my perception of less maintenance with the wired sensors.

I'm currently on v3.0.0 and want to upgrade to most current version via this install.

Finally, any recommendations for automation / notification that you find most useful?

Thanks for your help - it is greatly appreciated.

Did you test it and works?

Hello

Where are you located?

Thanks


Sent from my iPhone using Tapatalk

Please send me your contact info. 

Please send me your contact info too.
 

Do you have a phone number that we can contact you at?

We are looking for support for a Control4 tech for a system that is already built.

Do you work in Palm Beach County?
 

Yes I can go there.


Sent from my iPhone using Tapatalk

I’m a Control4 certified tech. Available for any service call, upgrade , programming or installation in S Florida.

Thanks

Sent from my iPhone using Tapatalk

Looking for a Control4 tech in Orlando,Fl to support a customer. DM for more info.

Thanks

Sent from my iPhone using Tapatalk

The model I’m using is the 640 and from what I can read on the description is not supported since the 640 is only RS232.