Autosean

Do you have a ring driver?

Sent from my SM-S916U using Tapatalk

Zaphod thanks for the quick response. I already have the firestick all set up as I use it today. Do you see any additional advantage of adding another one? Will the maxtix be fast enough to swap over before the alexa pushes the anounment?

Sent from my SM-G960U using Tapatalk

Hey All- I'm resurrecting this thread as I need some help.   I'm on 3.1.3 and have a Firestick connected at the rack with an audio stripper to an input on the audio matrix.   I have several rooms with ECHO Dots.   I'd like to use the ECHO announcement feature  input from a DOT and broadcast the announcement out from the fire stick to all the speakers.   Should I use an IFTT or native programing via intercom anywhere?   It sounds easy but can put my finger on how to trigger it?

Thanks,      

Thank you all for the support and expertise. I think I'm going to bail on DMX for now and head towards Shelly. I like the idea of the other Shelly offerings and will give them a shot.

You all know how it is, I look at all the great features different avenues can provide but in reality only use a few.

Thanks again.

Sent from my SM-G960U using Tapatalk

Thanks All, much appreciated..

23 minutes ago, lippavisual said:

In order to use those drivers, you need the ES box.  C4 sends 232 commands to this box, then the box sends DMX data to the lights.

Fantastic drivers and hardware.  Ive been running it in my own home for about 5 years now and keep adding more and more LV lighting.

Thanks lippavisual..    I'm from the Boston area too.  What are your thoughts on the Shelly with  Domaudeo Shelly driver?

So I can't use the EA3 to generate the signals via RS232? I hava a XLR to 3.5mm Cable?



Sent from my SM-G960U using Tapatalk

Hi Guys

I need some advice in regards to connecting light strips up to C4. I've invested in a mean well 600 W power supply https://www.amazon.com/dp/B00DEDB2U2/ref=cm_sw_r_cp_apa_i_7LZmFb3DBS8TB. along with a 32 channel DMX controller. https://www.amazon.com/dp/B075FHJM35/ref=cm_sw_r_cp_apa_i_LNZmFbP2QTHSB. I would like to use the Domaudeo Advanced DMX drivers https://www.blackwiredesigns.com/store/advanced-dmx-for-control4/ but I need to confirm if the engineering solution engine is required or recommended?

The initial deployment will be 2 lengths of 3M 50/50 in series and one 3M. I do plan to expand in the future, but in the short term like to understand if I can deploy the solution without the engineering solution engine.

If not recommendations would be great.

Thanks

Sent from my SM-G960U using Tapatalk

Looking forward to seeing everything. Sounds great

Sent from my SM-G960U using Tapatalk

Hi, can you pm me on the SR 260?

Thanks

Sent from my SM-G960U using Tapatalk

Sorry didn't get anything..

Sent from my SM-G960U using Tapatalk

PM sent

Sent from my SM-G960U using Tapatalk

Sent from my SM-G950U using Tapatalk