Waring192

On the right side of your picture there are 6 silver standoffs where the power supply would mount to. You will need all the wiring connectors as well as I do not see them on the small circuit board near the front. 2 White and 1 Red connector)

Sorry, I misread your post. So I only need the ICEpower400SM? I dont see where ICEpower80SM is on the photo and I also I have opened mine up and there is only room for the ICEpower400SM by the looks of it?

Picked this kit up either ex demo or damaged box for £2400 inc vat:

- Autonomic Mirage M401E - ex demo @ £325. Compared to the Control4 or Triad how good is it? It’s around £3k new.

- Sim2 3D - damaged box and scratches on the top It’s only 1080p but at £13k rrp why is it so bloody much?! Keep or sell? I paid £900 for it. 

- RTI VHD-4x - new but missing something but works fine. I have a Leaf 1082, how does it compare as I only paid £600 for this. Need receivers also.

- LG65GX MINE!!!

- Elac Sub 2030 at £225. Was going to keep as a upgrade from my monitor audio radius sub?

Ok lookout for one then

In perfect working condition.

Looking for £125 ono + delivery

Decided to change over to Shelly devices so no need for my driver anymore. Im sure it's ok to transfer the license. 

£50

Hello!

I have a nice new August lock (well two in fact) and also the adaptable Danalock Euro Cylinder.

I need the deadbolt part where the screws line up with the mounting plate. I already have a backset (I think it’s called that) but the screws do not line up so I need one that a Euro Cylinder can fit in and also the mounting plate screws can fit to it.

Photo below with blue dots representing where the holes need to be so the bolts/screws that hold the mounting plate against the door line up through the door and lock:

https://imgur.com/gallery/xtTdjZ3

At the moment I have just screwed the plate to the wooden door but would like to use the threaded metal bolts so the mounting plate is fixed to the lock and door, not just the door.

Preferably on Amazon or somewhere next day delivery in the U.K.

Cheers

PS, I mentioned before that I do have the correct Euro cylinder and keys etc already, I just need the backset/deadbolt that matches the mounting plate.

Never been used. Was purchased from Doorbird themselves as a refurbished product. Comes with separate mounting kit so you have lots of spare parts if needed. Boxed with loads of instructions and parts.

£295 + delivery

[https://imgur.com/a/JJr2dVc](https://imgur.com/a/JJr2dVc)

Hello,

I just picked up an DS2 on eBay for £500 in perfect condition but had to but the backplate and it looks like I need a tinny Allen key or some sort. Before I order a bunch of small sets off Amazon does anyone know the exact size?

Hello,

I have a EU Samsung QE55Q6FAM which on the IP has not option for IP control unless the USA version QE556FNA. I can still control my TV via various iPhone Apps (It shows on the TV if I want XXX to control it to which I say yes) and I can turn TV on/OFF, volume etc. The QE55Q6FNA which doesn't work on mine tries to use port 1515. 

The Control4 driver is for QE55Q6FNA which doesn't work on mine tries to use port 1515. Is it possible to either change the post it uses or should I just use EX-Link from the EA-1 in the room? If its EX-Link what else do I need apart from 3.5mm jack? I have a USB to TTL serial I could use with a Pi if needed and connect the wires from the 3.5mm to usb stick or would it work but just plugging the 3.5mm cable from the EX-Link to the EA-1?

As above. Full Belkin WeMo licence for £60.

Cheers

Is it HDMI 2.1? If so I will buy now!

Just wondering how everyone assigns there IP's, vlans, subnets etc? It would be interesting to see how dealers address the situation so it doesn't become a random way.

I currently have 2 Tiles for each set of keys and also the wallet one and find them dammed useful for finding things. Anyone able to make a driver for them if possible?

You attach the little fob to your keys or bag etc or get the wallet one which is slightly thicker than a Credit/Debit card. You have an app on your phone that can make the individual Tile make a sound and vibrate. Also, f you have lost your phone you can press the button on the Tile to find your phone!

https://www.thetileapp.com/en-gb/

Cheers

Cracking deal who ever got it!!

Just now, Amr said:

Yes, it should, just copy the configuration over your new setup, cloud key should have cut it for you, am not sure why all this hassle with Gen 2!

Sounds perfect! What about my UniFI Protect? Shall I use UniFi Video instead?

29 minutes ago, Amr said:

Am running the controller over Docker on my Synology NAS, working just fine and I don’t use or need Cloud key!

Hmm, I'm running the Cloudkey 2+ so I can use UniFi Protect also...

If I installed UniFi Video and Controller on my Unraid box would it work the same as it is now and could sell the Cloudkey 2+?

17 minutes ago, Amr said:

Controller version 5.14.23

Firmware version 4.3.21.11325

Note that My AP’s are UAP-AC-LR

Sorry, mine is:

Controller version 5.14.23

UniFi Cloud Key G2+ firmware is v. 1.1.13 (what controller are you using?)

AP's are UniFi AP-nanoHD with firmware 4.3.21.11325

30 minutes ago, Amr said:

Works well for me, require some basic programing to allow for Notifications on C4 GUI and App, what is the issue!

Im having trouble also but in contact with TheWizard. He thinks it might be to do with me running the latest FW on the Controller: v. 1.1.13

What version are you using?

I have this but cannot connect to the UniFi Controller using either the ip or the ip and port in the Connections>Network tab? It says 'Not Addressed'?

48 minutes ago, Cyknight said:

Pretty confident they have them manufactured direct from a factory (either owned or OEM, not sure), they're not a 3rd party design that's adapted (unlike the DS series doorstation for example, made by 2N). I've at least never seen a 'knock-off'

Cheers for the info, I have a 10" T3 with a cracked screen so I was going to see if I could somehow get hold of the display only from the manufacture. 

Just wondering if anyone knows who makes the T3 wall and table 7" and 10" screens?

3 minutes ago, msgreenf said:

It's BT only. No

Sent from my Pixel 3a XL using Tapatalk
 

It supports Apple's HomeKit and can be accessed anywhere so it must be WiFi also?

EDIT: Just looked and your right its bluetooth one sadly.

Just stumbled across this nice looking device and was wondering if there was a driver for it? I have looked but not found as yet?

https://level.co/shop

As above.

Also interested in 7" in wall touchscreen in white.