dmayorgajr

Did anyone get this to work.  My freeswitch is offline, I can't get it to work.  I have tried everything mentioned and re-booted the system at least 20 times already and nothing seems to work.  Touchscreens get rings from the DS2's but iphones don't.  When you go to intercom on the iphone you get an error "intercom gateway not registered".  ON the touchscreens it works fine.  Any idea what is happening?

Question on this

I have the same a gate that automatically closes after a minute.  I have tried the settings above but can't get this to work.

I have the DS2 to Hold and Relay to Pulse

Macros are set up like the above but the gate opens and closes.  If I swap the It DS2 as Pulse and the Gate Relay as Hold then when triggered the relay never closes the gate using the macro or any other option.  Not sure what I am doing wrong here.  

@bnet seems like the AS migration from nexia broke the driver.

created a new activation code, got Mobile ID and API Key, but when I click query nexxia I get: error receiving data from nexia.  confirm license and nexia are activated.

then under the bstat I get the status of: starting bstatwebsocket server on port 40259

something went bonkers in the past 2 weeks.  any idea?

So when I click camera's on the iPhone app, I just get a still image on the grid view (which I know is intended)

However when I click on a specific camera, that too is only showing me a still image.  

Set-Up is Luma NVR 510

Drivers are all up to date 

Can't figure out why this is happened now and didn't in the past.  Any ideas?

On 1/22/2019 at 8:11 AM, ILoveControl said:

Thank you very much for the reply. Do I need to have NC and NC connected to the trigger? I agree the gate manual is confusing - 

I have been testing different setups. For example I can get the gate to open using a code on the  keypad that I set. But then it will not close...... I have to manually set the gate set it to closed then it responds again.

Interesting enough .. when I get the gate to open through the DS2 and its open, it then doesn't close with the remote. I have to do the manual move above.I tried with NO and nothing happens. Tried with both NO and NC connected (have COM in the middle of the relay to COM on the gate motor as you suggested).

 

I am just stumped

Did you ever get this figured out.  I have a somewhat similar problem

I connected the DS2 NO and COMM to the gate's NO and COMM, the gate opens but I can't close it via C4.  I can with the remote, just C4 is only sending open signals to the device.  Do I need to connect both NO and NC from the DS2 to the gate?  I think I did that and the remote stopped working... (been screwing with this for at least 6 hours) and if I remember correctly it didn't work either but it's so late I can't try again now given its so dark.

Any advice would be greatly appreciated.