gary16 Posted April 7, 2012 Share Posted April 7, 2012 anyone know how or where to find this Link to comment Share on other sites More sharing options...
kaarchie Posted April 7, 2012 Share Posted April 7, 2012 I have not tried it yet but I would imagine any of the other Onkyo IP Drivers would work if they have the same connectivity as that model Link to comment Share on other sites More sharing options...
gary16 Posted April 7, 2012 Author Share Posted April 7, 2012 I taught so too but can't get it to respond i have used the 609 no problem but this new one sucks Link to comment Share on other sites More sharing options...
cbstive Posted April 10, 2012 Share Posted April 10, 2012 Added the beta TX-NR609 network driver. Everything seems to work except Powering ON. I have checked all connections it powers down just not up? Is it the driver? The documentation states:POWER MANAGEMENT:Power Management is accomplished via the Zones control in the Navigators. The Composer's control-control power control commands are ignored. For Power Control Programming, the individual zone power commands are available via Programming->Actions->[Receiver Name]->Device Specific Commands->Zone PowerTried some different commands but nothing is working. I will probably will go back to the 708 driver which worked. Link to comment Share on other sites More sharing options...
gary16 Posted May 29, 2012 Author Share Posted May 29, 2012 yes i got it to work but that power issuse is there , still suffering through it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.