MikeNYC Posted February 11, 2013 Share Posted February 11, 2013 For the past few days I've noticed very sluggish performance with my system, such as light scenes taking 10-15 seconds to execute and SR250 displays also taking 5-15 seconds to populate. I noticed my HC1000's CPU seems to hover around 95% now, with the Director process consuming all of the resources. Rebooting the HC1000 or any other part of the system hasn't had any effect. In the log I see a ton of "Checking if source/input is available on driver [device]", "checking if multiselect driver [device]" and "getting initialize data for driver [device]" flooding past.Any thoughts on what to check next, short of an upgrade? Link to comment Share on other sites More sharing options...
neil12011 Posted February 11, 2013 Share Posted February 11, 2013 What do you have in the system in way of IP drivers or 2way serial drivers? Link to comment Share on other sites More sharing options...
MikeNYC Posted February 15, 2013 Author Share Posted February 15, 2013 No 2 way serial drivers, no IP drivers, other than the old Weather driver that no longer works properly. Have a few one way serial drivers to control blinds etc though.It seems to have sorted itself out on its own...not exactly sure what happened. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.