dannywatts Posted July 13, 2014 Share Posted July 13, 2014 I know this topic has been covered by other users, but reading them it look slike you need to have an understanding of programming. I'm a newbie to C4, but today both my HR-250's seemed to crash and are now both saying "Waiting For Network" I have tried removing the (rechargable) batteries on both, and I've tried holding down '0' and the C4 button, but nothing has changed. Any other things I can try to reboot it? Thanks Link to comment Share on other sites More sharing options...
qVAMPIREp Posted July 13, 2014 Share Posted July 13, 2014 Reboot your main controller(s) Link to comment Share on other sites More sharing options...
dannywatts Posted July 13, 2014 Author Share Posted July 13, 2014 How do I do that - switch on and off?I don't want to do anything that will render the whole system useless - ie need an engineer to come and reprogram or reload anything! Link to comment Share on other sites More sharing options...
CFUG Posted July 13, 2014 Share Posted July 13, 2014 I was just over at a friends house to do a walk-thru of his system and he complained of two SRs gone worthless. One merely took a 4-tap of the big 4 and the other had squashed battery contacts. Both now working. Just try a bat swap too. Link to comment Share on other sites More sharing options...
qVAMPIREp Posted July 13, 2014 Share Posted July 13, 2014 How do I do that - switch on and off?I don't want to do anything that will render the whole system useless - ie need an engineer to come and reprogram or reload anything!Pull the power plug out, wait 30 seconds and plug it back in again. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.