Dinsdale Posted June 6, 2016 Share Posted June 6, 2016 Does anyone know the voltage & amp output of the AC adapter used with the V2 portable touch screen (C4-TSMC7-EN-BL)? Better yet, where can I buy one? Link to comment Share on other sites More sharing options...
RyanE Posted June 6, 2016 Share Posted June 6, 2016 It can be powered over PoE, so you could use an inline PoE adapter. The power supply I believe is 12V 1A, center positive. Edited to add: It does say that (12V 1A) on the bottom of the docking station as well. RyanE Link to comment Share on other sites More sharing options...
Dinsdale Posted June 6, 2016 Author Share Posted June 6, 2016 Thanks RyanE. I am currently charging via POE, but the room I will be using it in does not have POE, I would need to purchase an injector. I have so many low voltage adapters I was hoping to get lucky and be able to use one. You're also correct about the power specs on the cradle. I didn't realize there was a sticker on the bottom.. Link to comment Share on other sites More sharing options...
RyanE Posted June 7, 2016 Share Posted June 7, 2016 Neither did I until after I had posted the specs on the wall wart. I got curious if it was also on the charging station, since you'd be hosed if you lost the wall wart. RyanE Link to comment Share on other sites More sharing options...
Question
Dinsdale
Does anyone know the voltage & amp output of the AC adapter used with the V2 portable touch screen (C4-TSMC7-EN-BL)? Better yet, where can I buy one?
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.