Mav-Jason Posted November 4, 2008 Share Posted November 4, 2008 This is an odd one. All we did was throw an SR-250 in place of a V2 on an existing system. All works fine EXCEPT the numbers '0' and '5' are totally reversed... press '0', '5' comes up, and vice versa.Anyone else experienced this? Another 1.6 issue maybe?oops almost forgot, it's hitting a DirecTV H21 where this occurs. Link to comment Share on other sites More sharing options...
slemay Posted November 4, 2008 Share Posted November 4, 2008 You're using a beta version of the driver. Are you a dealer? If so - don't use BETA software at clients installs. Delete the driver and re-install it with a NON beta. Link to comment Share on other sites More sharing options...
Mav-Jason Posted November 4, 2008 Author Share Posted November 4, 2008 Yes dealer, no beta, and this is in our showroom demo sys (not a big deal and already fixed).Just thought I'd throw it out there to see if anyone else has seen this. Link to comment Share on other sites More sharing options...
Matt Posted November 4, 2008 Share Posted November 4, 2008 The System Remote Control, SR-250 requires the latest system software version of 1.6. If you’re on an earlier version of 1.6, please remove the driver, update, and then add the sr-250 driver back into the project. Link to comment Share on other sites More sharing options...
The Home Theater Store Posted November 16, 2008 Share Posted November 16, 2008 Has anyone had an issue with getting the SR-250 to show up in Composer 1.6.0.512? Under User Interfaces tab mine shows v1 and v2 remotes but not the SR-250.I was hoping to see 1.7.0.248 on the C4 dealer site but no such luck.Thanks in advance,Jamie WedelThe Home Theater Store390 Barrett ParkwayKennesaw GA 30144(770) 792-0250(404) 234-3131http://www.theHomeTheaterStore.TV/ Link to comment Share on other sites More sharing options...
K&J Posted November 16, 2008 Share Posted November 16, 2008 Has anyone had an issue with getting the SR-250 to show up in Composer 1.6.0.512? Under User Interfaces tab mine shows v1 and v2 remotes but not the SR-250.I was hoping to see 1.7.0.248 on the C4 dealer site but no such luck.Thanks in advance,Jamie WedelThe Home Theater Store390 Barrett ParkwayKennesaw GA 30144(770) 792-0250(404) 234-3131http://www.theHomeTheaterStore.TV/Are you certain you have the latest Composer installed? Right click and choose default drivers.. That should do it.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.