gcjacob Posted December 8, 2008 Share Posted December 8, 2008 Hi all,I have a Denon 3808Ci and I want to know what is the layout I have to use on the serial cable in order to have the receiver controlled by my HC300 thought serial cable.Thanks in advance. Link to comment Share on other sites More sharing options...
thecodeman Posted December 8, 2008 Share Posted December 8, 2008 most likely it's pins 2, 3, & 5. does it say anything in your manual about it? Sometimes they do. Link to comment Share on other sites More sharing options...
gcjacob Posted December 8, 2008 Author Share Posted December 8, 2008 Not on denon manula, but on their website they do.I've bought a cabe that has all the pins connected (pin 1 wth pin1, pin 2 with pin 2, and so on) but it is not working.Thats why i'm asking. If i know what it is on DENON, how do i found what is it on the HC 300thanks Link to comment Share on other sites More sharing options...
thecodeman Posted December 8, 2008 Share Posted December 8, 2008 I've seen it here before that the HC 300 is the same, 2 3 5 (tx rx and gnd). When I worked for an a/v company building rs232 cables for AMX gear, we used the same pinouts. Link to comment Share on other sites More sharing options...
gcjacob Posted December 8, 2008 Author Share Posted December 8, 2008 so,if they are the same, i have to connect the rx of HC300 to the tx of DENON, tx of denon to rx on HC 300 and gnd-gnd?So ee get to 2-3,3-2,5-5?Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.