2inspect Posted January 17, 2009 Share Posted January 17, 2009 I have older control4 media controller running version 1.6 and 10.5 touchscreen. When my dealer initially set up my system he created a custom button to turn on and off my projector in my theater room. The theater room has somewhat of an odd configuration in that there is a 40" lcd panel that hangs on the wall for daytime viewing and 100" projection screen for nighttime viewing that drops down in front lcd when projector turns on. Both the projector and lcd are fed the same video signal. When the custom button labeled projector is pressed it commands the lcd to turn off, the projector turns on, the electric projector screen is lowered and lights in the theater room turn off. This worked great until I added version2 remote to theater room. When the 4 button on the remote is pressed while the projector is on, it will also turn on the lcd and bring up the screen GUI on both displays. My question is there way to tell the controller not to turn on the lcd when the projector is being used. Any suggestions would be appreciated, thanks Link to comment Share on other sites More sharing options...
neil12011 Posted January 18, 2009 Share Posted January 18, 2009 You need to change the video endpoint to the projector. Link to comment Share on other sites More sharing options...
Mav-Jason Posted January 18, 2009 Share Posted January 18, 2009 You could also create a "dummy" room for that situation. And have one room turn off when the other turns on. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.