nyarjun Posted March 14, 2018 Share Posted March 14, 2018 I have a Atlona UHD-PRO3-88M matrix with two outputs connected to a ZA5000ES AV receiver. The AV receiver Zone A is connected to my basement TV and the Zone B is connected to my master bedroom TV. The problem is that when two outputs of the HDMI matrix are bound in the connections tab of Composer to the AV receiver, my master bedroom is stuck to one source and wont change. The problem is alleviated by only having one connection from the matrix to the AV receiver, but then I cannot have 2 different sources playing in the basement and master bedroom TVs. My dealer can't seem to figure it out, any ideas to fix this? Link to comment Share on other sites More sharing options...
sonic30101 Posted March 14, 2018 Share Posted March 14, 2018 are they using a path setter for each feed from the matrix into the AVR? you are getting into a double matrix scenario which can have wonky issues if not set up properly since it is not really a good practice to begin with in the first place. I havent worked much with that sony but it seems to have independent zone2 capability for your master bed to be independent Link to comment Share on other sites More sharing options...
nyarjun Posted March 14, 2018 Author Share Posted March 14, 2018 They are not using a path setter, I'll tell them to try that. Thank you. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.